Making an Anvil from a Forklift Fork | Making an Anvil and Stand
14.6 هزار بار بازدید -
2 سال پیش
-
It's time to upgrade my
It's time to upgrade my anvil. In this video, I made an anvil from an old forklift fork and a stand to support it. This anvil will primarily be used for knife making. Step by step anvil and stand making process.
Chapters
0:00 old "anvil"
0:09 shopping
0:33 cut wood
0:58 assemble stand
3:06 cut and assemble top
4:14 flatten top with router sled
5:30 router out channel for anvil
5:45 burnt edges
6:30 cut fork to size
7:45 clean up the metal
8:07 electrolysis
8:24 scrub it
8:55 laser
9:27 sand
10:03 glue top
10:52 anchor plate
11:33 drill holes
12:53 tapping holes
13:29 final placement
Chapters
0:00 old "anvil"
0:09 shopping
0:33 cut wood
0:58 assemble stand
3:06 cut and assemble top
4:14 flatten top with router sled
5:30 router out channel for anvil
5:45 burnt edges
6:30 cut fork to size
7:45 clean up the metal
8:07 electrolysis
8:24 scrub it
8:55 laser
9:27 sand
10:03 glue top
10:52 anchor plate
11:33 drill holes
12:53 tapping holes
13:29 final placement
2 سال پیش
در تاریخ 1401/06/17 منتشر شده
است.
14,621
بـار بازدید شده