Tilt Tool Axis in NX CAM
3.7 هزار بار بازدید -
11 ماه پیش
-
For parts with deep cavities
For parts with deep cavities and small vertical corners, our field tests indicate that 5-axis machines can improve machining productivity by up to 30 percent.
NX CAMs Tilt Tool Axis functionality lets NC programmers take advantage of the efficiencies of 5-axis machining without the challenges of traditional 5-axis programming. The programmer creates 3-axis tool paths and then tilt tool axis looks for potential collisions. When a potential collision is anticipated, the tool axis is gradually tilted away from the collision area, resulting in a 5-axis tool path that takes advantage of the short tool resulting in improved tool life and surface finish.
Learn from Carson Huber, Advanced Application Engineer at Siemens, how #NXCAM can support users creating more stable machining conditions on near-vertical geometry with the Tilt Tool Axis functionality.
00:00 Introduction
00:30 Overview
02:43 Manual Tilting
15:25 Machine Tool Characteristics
19:34 Collision Check/Avoidance
29:00 Converting 3-axis to 5-axis
34:24 Additional resources
34:51 Contact
Follow our blog for news and information about NX for Manufacturing: https://sie.ag/5Cj98y
To see a list of other NX CAM tech-tips visit us here: https://sie.ag/6updZe
Connect with peers and experts by visiting the NX Manufacturing on-line community: https://sie.ag/3pvxRL
Get more info about Siemens solutions for digital manufacturing: https://sie.ag/5FpWwT
NX CAMs Tilt Tool Axis functionality lets NC programmers take advantage of the efficiencies of 5-axis machining without the challenges of traditional 5-axis programming. The programmer creates 3-axis tool paths and then tilt tool axis looks for potential collisions. When a potential collision is anticipated, the tool axis is gradually tilted away from the collision area, resulting in a 5-axis tool path that takes advantage of the short tool resulting in improved tool life and surface finish.
Learn from Carson Huber, Advanced Application Engineer at Siemens, how #NXCAM can support users creating more stable machining conditions on near-vertical geometry with the Tilt Tool Axis functionality.
00:00 Introduction
00:30 Overview
02:43 Manual Tilting
15:25 Machine Tool Characteristics
19:34 Collision Check/Avoidance
29:00 Converting 3-axis to 5-axis
34:24 Additional resources
34:51 Contact
Follow our blog for news and information about NX for Manufacturing: https://sie.ag/5Cj98y
To see a list of other NX CAM tech-tips visit us here: https://sie.ag/6updZe
Connect with peers and experts by visiting the NX Manufacturing on-line community: https://sie.ag/3pvxRL
Get more info about Siemens solutions for digital manufacturing: https://sie.ag/5FpWwT
11 ماه پیش
در تاریخ 1402/06/28 منتشر شده
است.
3,723
بـار بازدید شده