Sharp LC-60LE820UN TV - LED Strip Testing - Long Version
23.9 هزار بار بازدید -
9 سال پیش
-
Sharp LC-60LE820UN TV LED strip
Sharp LC-60LE820UN TV LED strip testing procedure. Procedure uses 9 Volt batteries in serial for the power source (most people will not have a high voltage DC variable power supply). Remember a general rule (may be different for your TV) to apply 3 volts for each LED. So 30 LEDs would require 90 volts ... but start with a smaller voltage amount so you don't overload and burn out the strips.
I currently do not have any extra strips for sale.
You cannot buy these from a supplier (at least none I know of)
Mine came from broken Sharp televisions with the same issue.
Part numbers are listed in the video.
This procedure should work on the other Sharp models in this series (42", 50", etc)
I currently do not have any extra strips for sale.
You cannot buy these from a supplier (at least none I know of)
Mine came from broken Sharp televisions with the same issue.
Part numbers are listed in the video.
This procedure should work on the other Sharp models in this series (42", 50", etc)
9 سال پیش
در تاریخ 1394/04/06 منتشر شده
است.
23,952
بـار بازدید شده