Bosch Security - Calibration - Measure-based calibration
780 بار بازدید -
پارسال
-
In this video, we will
In this video, we will show how to use measure-based calibration.
We will go through the following steps of the calibration module in Configuration Manager:
[00:16] 1. Start
[00:25] 2. Scenario
[00:38] 3. Distortion
[00:46] 4. Perspective
[02:27] Verification
[03:00] 5. Finish
After you finish the calibration, you can go to the Main Operation tab in Configuration Manager, to see the results.
We will go through the following steps of the calibration module in Configuration Manager:
[00:16] 1. Start
[00:25] 2. Scenario
[00:38] 3. Distortion
[00:46] 4. Perspective
[02:27] Verification
[03:00] 5. Finish
After you finish the calibration, you can go to the Main Operation tab in Configuration Manager, to see the results.
پارسال
در تاریخ 1402/03/31 منتشر شده
است.
780
بـار بازدید شده