Wi-Fi Round LED Clock (ESP8266 and WS2812B)
1.2 میلیون بار بازدید -
6 سال پیش
-
Update 20190402: Added a thicker
Update 20190402: Added a thicker wall segment piece and also one single part if you're printer is large enough to print in one piece. Check the links below for the downloads.
---
This is a video about making a Wi-Fi enabled LED clock. It uses an ESP8266 WeMOS D1 Mini board to connect to the internet where it get's the time from an NTP server.
I've used Fusion 360 to design the clock and printed it with my Anet A8 3D printer with black and white PLA.
You can find the source code and 3D printing STL files on my GitHub page here:
https://github.com/leonvandenbeukel/R...
Website: https://www.leonvandenbeukel.nl
GitHub: https://github.com/leonvandenbeukel
---
This is a video about making a Wi-Fi enabled LED clock. It uses an ESP8266 WeMOS D1 Mini board to connect to the internet where it get's the time from an NTP server.
I've used Fusion 360 to design the clock and printed it with my Anet A8 3D printer with black and white PLA.
You can find the source code and 3D printing STL files on my GitHub page here:
https://github.com/leonvandenbeukel/R...
Website: https://www.leonvandenbeukel.nl
GitHub: https://github.com/leonvandenbeukel
6 سال پیش
در تاریخ 1397/12/25 منتشر شده
است.
1,245,041
بـار بازدید شده