Low Voltage Troubleshooting a Goodman Electric Heat only Unit
18.3 هزار بار بازدید -
3 سال پیش
-
I took one of the
I took one of the Goodman units that I recently wired in a video and show how to do voltage checks on a couple circuits. Since it is only a heat cool unit there are really on two circuits to look at besides the one powering everything.
Of course this is what I would do and it is all about learning for some of the new guys out there. I did make a wrong comment and tried to put up a comment in the video afterwards. In the typical 240 circuit there are two sides of power, each at 120 volts and typically in a fan relay circuit you only break one side of power. So there is 120 volts going into that relay and should be 120 volts coming out. It is pretty much the same on the 208 power that I have in the shop. 120 volts in and out of the relay.
Anyway, I hope you get something out of it.
00:00 Intro
01:07 Low Voltage Troubleshooting
Of course this is what I would do and it is all about learning for some of the new guys out there. I did make a wrong comment and tried to put up a comment in the video afterwards. In the typical 240 circuit there are two sides of power, each at 120 volts and typically in a fan relay circuit you only break one side of power. So there is 120 volts going into that relay and should be 120 volts coming out. It is pretty much the same on the 208 power that I have in the shop. 120 volts in and out of the relay.
Anyway, I hope you get something out of it.
00:00 Intro
01:07 Low Voltage Troubleshooting
3 سال پیش
در تاریخ 1400/08/16 منتشر شده
است.
18,309
بـار بازدید شده