Part 3: Building a Robotic Pan-Tilt Camera Control with a Raspberry Pi Pico - Hardware Revision

XtendedGreg
XtendedGreg
147 بار بازدید - 8 ماه پیش - Today we are going to
Today we are going to build a robotic pan and tilt camera control to be able to perform precise movements using servos and joystick control. A Raspberry Pi Pico will be the brains to control the servos directly, but this will be a complex but portable project to be able to have repeatable motion and precise control. We are going to replace the servo electronics and reassemble for testing. We are going to be integrating an H-Bridge driver for the motors and an I2C current sensor to monitor for motor stall conditions to protect the electronics and motor. We are going to run some test code to make it move based on the code that we implemented last time, but with our new driver we should have the capacity to make it smooth as silk. Will it succeed? Tune in to find out! Part 1: youtube.com/live/Wr-uipfGNzY Part 2: youtube.com/live/oXdZTKddsfo Part 4: youtube.com/live/bBzli1YWGFY #notsponsored
8 ماه پیش در تاریخ 1402/11/08 منتشر شده است.
147 بـار بازدید شده
... بیشتر