Spektrum AR637T - Installation and setup with DX8

As I installed so many Spektrum AR637T and AR630 receivers I decided to make an instruction video on how I do it. To dig deeper search for the setup videos from Horizon Hobby where they go into things more detailed.

As there are so many settings you can do this is not a complete setup of an RC plane. It's more to make forward programming easier with the AR637T/630/630 receivers.


I did simplify the orientation a bit in this video to have the receiver connectors pointing either straight forward or straight to the back of the plane as the only option but as someone pointed out it is possible to also have the receiver mounted at an 90 degree angle (sideways) to the fuselage length. But it's very uncommon to have it sideways so I never consider it an alternative. But it is possible.


Channel order for the Spektrum-system is:
Ch1: Throttle
Ch2: Ailerons
Ch3: Elevator
Ch4: Rudder
Ch5: Gear ( or SAFE)
Ch6: Flaps


AS3X gain for instance can be set using an AUX channel for 7 channel or more transmitters.
In total the AR637T or AR631/630 have 20 channels and the channels above 7 can be used to set gain values for instance.

• #people_blogs
• #spektrum_ar637t
• #spektrum_ar637t_setup
• #spektrum_ar630
• #spektrum_dx8