360 LIVE: Fusion 360 Tips & Tricks
25.3 هزار بار بازدید -
5 سال پیش
-
Skip the intro:
Skip the intro: 2:36
In this LiveStream, Brad will show over 20+ Tips & Tricks in Fusion 360!
Link to all the tips in one pdf! https://www.dropbox.com/s/q49cs4qt408...
Table of Contents
4:13 #1 - Shift Key for Tangent line
5:40 #2 - Line command has tangent arc built in.
6:40 #3 - Click existing dimension to reference it
8:23 #4 - In Sketch, right-click to see constraint options
10:29 #5 - Typing formulas/fractions in dialog boxes
13:27 #6 - Right-click after pre-selection shows commands that make sense
15:37 #7 - Show Dimension on 3D model
16:56 #8 - Re-Anchor command
19:40 #9 - Hold down left mouse button to “Probe” through selection
21:30 #10 - Rename features
23:17 #11 - Right-click-drag straight up to repeat last command
26:02 #12 - Select right-to-left to do window crossing selection
27:42 #13 - Click on face to select all edges on that face for chamfer/fillet
30:15 #14 - Select feature in timeline to select all edges of that feature for fillet/chamfer
31:38 #15 - Shell command to speed up design
34:10 #16 - Create a new component at any level by right-clicking in browser and select new component
36:00 #17 - Custom iso view by using New Named View
39:35 #18 - Control key to “control” your selection when positioning parts
41:33 #19 - S-Key
45:20 #20 - Isolate and Unisolate
46:42 #21 - Show All Components
47:58 #22 - Select Extrude first, then you can select profiles through parts
49:08 #23 - Right click while in sketch dimension to get osnap options
50:42 #24 - Right-click after creating dimension to specify the orientation of dimension
52:32 #25 - Select by name, size, invert….and all those
57:25 #26 - Create your own Keyboard Shortcuts!
Mark your calendars and subscribe to our channel to be notified when we go live! https://autode.sk/2CxAQTp
►SUBSCRIBE: https://autode.sk/2UvfzRh
►COMPARE: https://autode.sk/2HsSICc
►TRIAL: https://autode.sk/2CA9NqC
In this LiveStream, Brad will show over 20+ Tips & Tricks in Fusion 360!
Link to all the tips in one pdf! https://www.dropbox.com/s/q49cs4qt408...
Table of Contents
4:13 #1 - Shift Key for Tangent line
5:40 #2 - Line command has tangent arc built in.
6:40 #3 - Click existing dimension to reference it
8:23 #4 - In Sketch, right-click to see constraint options
10:29 #5 - Typing formulas/fractions in dialog boxes
13:27 #6 - Right-click after pre-selection shows commands that make sense
15:37 #7 - Show Dimension on 3D model
16:56 #8 - Re-Anchor command
19:40 #9 - Hold down left mouse button to “Probe” through selection
21:30 #10 - Rename features
23:17 #11 - Right-click-drag straight up to repeat last command
26:02 #12 - Select right-to-left to do window crossing selection
27:42 #13 - Click on face to select all edges on that face for chamfer/fillet
30:15 #14 - Select feature in timeline to select all edges of that feature for fillet/chamfer
31:38 #15 - Shell command to speed up design
34:10 #16 - Create a new component at any level by right-clicking in browser and select new component
36:00 #17 - Custom iso view by using New Named View
39:35 #18 - Control key to “control” your selection when positioning parts
41:33 #19 - S-Key
45:20 #20 - Isolate and Unisolate
46:42 #21 - Show All Components
47:58 #22 - Select Extrude first, then you can select profiles through parts
49:08 #23 - Right click while in sketch dimension to get osnap options
50:42 #24 - Right-click after creating dimension to specify the orientation of dimension
52:32 #25 - Select by name, size, invert….and all those
57:25 #26 - Create your own Keyboard Shortcuts!
Mark your calendars and subscribe to our channel to be notified when we go live! https://autode.sk/2CxAQTp
►SUBSCRIBE: https://autode.sk/2UvfzRh
►COMPARE: https://autode.sk/2HsSICc
►TRIAL: https://autode.sk/2CA9NqC
5 سال پیش
در تاریخ 1398/05/24 منتشر شده
است.
25,392
بـار بازدید شده