ESP32 Hydroponic System, DIY Hydroponics System using pH Sensor, EC, DS18B20, & A02YYUW Sensor
2.3 هزار بار بازدید -
2 ماه پیش
-
ESP32 Hydroponic System, DIY Hydroponics
ESP32 Hydroponic System, DIY Hydroponics System using pH Sensor, EC, DS18B20, & A02YYUW Sensor
Read the article:
https://www.electroniclinic.com/hydro...
Watch the same video in Hindi/Urdu:
hydroponic system in Hindi Urdu pH se...
Free online PCB Gerber Viewer and DFM:
https://www.nextpcb.com/free-online-g...
Get $30 off on your First High quality PCB
https://www.nextpcb.com/free-pcb-prot...
Check Free 5 pieces of PCB Assembly here
https://www.nextpcb.com/blog/Free-PCB...
Related videos:
Hydroponics Version 2:
Hydroponics System using pH Sensor, E...
Arduino Hydroponics System:
Arduino Hydroponics, DIY Hydroponics ...
ESP32 and Blynk v2.0 getting started tutorial:
Blynk 2.0 Getting Started Tutorial, N...
DIY ESP32 Development with 4G LTE support:
SIM7600G 4G LTE GSM & ESP32 Developme...
ESP32 Board Installation in the Arduino IDE:
ESP32 Arduino IDE | ESP32 Board Manag...
A02YYUW waterproof Ultrasonic Sensor:
Waterproof Ultrasonic Sensor A02YYUW ...
TOF10120 Laser RangeFinder Distance Sensor:
TOF10120 Laser Range Sensor with Ardu...
ESP32 real-time car tracking:
Real Time GPS Tracker using SIM7600G ...
ESP32 Water Level Monitoring:
Water Level Monitoring with Ultrasoni...
SMD Soldering for Beginners:
SMD Soldering Tutorial for beginners,...
ESP32 TDS/EC Sensor:
ESP8266 with TDS Sensor or EC Sensor ...
DS18B20 waterproofed one-wire digital temperature sensor:
Blynk 2.0 and ESP8266 with DS18B20 Te...
Arduino pH Meter V1:
Arduino Project: pH sensor Working, a...
Support me on Patreon and get access to hundreds of projects:
Patreon: ElectroniClinic
ESP32 Hydroponic System:
*****
Today, we are going to make the most practical iOT based Hydroponic System using the ESP32 WiFi + Bluetooth Module, the DFrobot’s Gravity Analog pH Sensor Kit V2, EC or TDS Sensor, Analog Signal Isolators, DS18B20 waterproofed one-wire digital temperature sensor, the most versatile UART version of the A02YYUW Waterproof Ultrasonic Sensor, and Blynk application for the monitoring.
Let’s first start with the Gravity Analog pH Sensor kit V2. And let me also tell you this is the upgraded version of the pH meter V1 which could only be used with 5V compatible controller boards, whereas the pH Meter V2 is compatible with both 3.3V and 5V compatible controller boards.
Inside this box you get a product qualification card.
A paper that gives you an introduction, technical details, and safety tips about pH sensor.
A pH probe with the BNC connector.
The pH sensor interface board or the signal conversion board. It must be kept dry and clean, otherwise, it will affect the input impedance, resulting in an inaccurate measurement.
Some wires and screws.
And standard buffer solutions 4.0 and 7.0. For the perfect calibration of the pH Sensor, you should have these buffer solutions. That’s why I ordered this complete kit.
I also ordered two Analog Signal Isolators. If you have ever used a pH sensor and an EC sensor at the same time in the same container, you know that the sensor readings can get messed up because of ground looping. So, to avoid ground looping, I am going to use two Analog Signal Isolators. I will use one with the pH sensor and the other one with the EC sensor.
******
Amazon Purchase links:
*********
ESP32 WiFi + Bluetooth Module (Recommended)
https://amzn.to/3v40DkE
SSD1306 Oled display
https://amzn.to/3KovKvb
DS18B20 one-wire digital waterproof temperature sensor
https://amzn.to/3wNn7Y9
Analog Signal Isolators
https://www.dfrobot.com/product-1621....
EC/TDS Sensor
https://www.dfrobot.com/product-1662....
DFrobot Gravity Analog pH sensor Kit V2
https://www.dfrobot.com/product-1782....
Other must-have Tools and Components:
Arduino Nano USB C type (Recommended)
https://amzn.to/4ahGLdk
Top Arduino Sensors:
https://amzn.to/3vZbnfM
Super Starter kit for Beginners
https://amzn.to/3cq56C5
Top Oscilloscopes
https://amzn.to/3ctF3d8
Variable Supply:
https://amzn.to/2PEAqE7
Digital Multimeter:
https://amzn.to/2QGRPg1
Top Soldering iron kits: "best"
https://amzn.to/39nqDtb
3D printers:
https://amzn.to/3ruG1dt
CNC Machines:
https://amzn.to/3cuZWVv
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
For more Projects and tutorials visit my Websites
Electronic Clinic:
https://www.electroniclinic.com/
Programming Digest:
https://programmingdigest.com/
Follow me on Instagram:
Instagram: electroniclinic
Follow my Facebook Page Electronic Clinic:
https://web.facebook.com/profile.php?...
Follow my Facebook Group, Arduino Projects:
Facebook: 190031841821771
Email:
[email protected]
#hydroponicsystem #esp32project #hydroponic
Read the article:
https://www.electroniclinic.com/hydro...
Watch the same video in Hindi/Urdu:
hydroponic system in Hindi Urdu pH se...
Free online PCB Gerber Viewer and DFM:
https://www.nextpcb.com/free-online-g...
Get $30 off on your First High quality PCB
https://www.nextpcb.com/free-pcb-prot...
Check Free 5 pieces of PCB Assembly here
https://www.nextpcb.com/blog/Free-PCB...
Related videos:
Hydroponics Version 2:
Hydroponics System using pH Sensor, E...
Arduino Hydroponics System:
Arduino Hydroponics, DIY Hydroponics ...
ESP32 and Blynk v2.0 getting started tutorial:
Blynk 2.0 Getting Started Tutorial, N...
DIY ESP32 Development with 4G LTE support:
SIM7600G 4G LTE GSM & ESP32 Developme...
ESP32 Board Installation in the Arduino IDE:
ESP32 Arduino IDE | ESP32 Board Manag...
A02YYUW waterproof Ultrasonic Sensor:
Waterproof Ultrasonic Sensor A02YYUW ...
TOF10120 Laser RangeFinder Distance Sensor:
TOF10120 Laser Range Sensor with Ardu...
ESP32 real-time car tracking:
Real Time GPS Tracker using SIM7600G ...
ESP32 Water Level Monitoring:
Water Level Monitoring with Ultrasoni...
SMD Soldering for Beginners:
SMD Soldering Tutorial for beginners,...
ESP32 TDS/EC Sensor:
ESP8266 with TDS Sensor or EC Sensor ...
DS18B20 waterproofed one-wire digital temperature sensor:
Blynk 2.0 and ESP8266 with DS18B20 Te...
Arduino pH Meter V1:
Arduino Project: pH sensor Working, a...
Support me on Patreon and get access to hundreds of projects:
Patreon: ElectroniClinic
ESP32 Hydroponic System:
*****
Today, we are going to make the most practical iOT based Hydroponic System using the ESP32 WiFi + Bluetooth Module, the DFrobot’s Gravity Analog pH Sensor Kit V2, EC or TDS Sensor, Analog Signal Isolators, DS18B20 waterproofed one-wire digital temperature sensor, the most versatile UART version of the A02YYUW Waterproof Ultrasonic Sensor, and Blynk application for the monitoring.
Let’s first start with the Gravity Analog pH Sensor kit V2. And let me also tell you this is the upgraded version of the pH meter V1 which could only be used with 5V compatible controller boards, whereas the pH Meter V2 is compatible with both 3.3V and 5V compatible controller boards.
Inside this box you get a product qualification card.
A paper that gives you an introduction, technical details, and safety tips about pH sensor.
A pH probe with the BNC connector.
The pH sensor interface board or the signal conversion board. It must be kept dry and clean, otherwise, it will affect the input impedance, resulting in an inaccurate measurement.
Some wires and screws.
And standard buffer solutions 4.0 and 7.0. For the perfect calibration of the pH Sensor, you should have these buffer solutions. That’s why I ordered this complete kit.
I also ordered two Analog Signal Isolators. If you have ever used a pH sensor and an EC sensor at the same time in the same container, you know that the sensor readings can get messed up because of ground looping. So, to avoid ground looping, I am going to use two Analog Signal Isolators. I will use one with the pH sensor and the other one with the EC sensor.
******
Amazon Purchase links:
*********
ESP32 WiFi + Bluetooth Module (Recommended)
https://amzn.to/3v40DkE
SSD1306 Oled display
https://amzn.to/3KovKvb
DS18B20 one-wire digital waterproof temperature sensor
https://amzn.to/3wNn7Y9
Analog Signal Isolators
https://www.dfrobot.com/product-1621....
EC/TDS Sensor
https://www.dfrobot.com/product-1662....
DFrobot Gravity Analog pH sensor Kit V2
https://www.dfrobot.com/product-1782....
Other must-have Tools and Components:
Arduino Nano USB C type (Recommended)
https://amzn.to/4ahGLdk
Top Arduino Sensors:
https://amzn.to/3vZbnfM
Super Starter kit for Beginners
https://amzn.to/3cq56C5
Top Oscilloscopes
https://amzn.to/3ctF3d8
Variable Supply:
https://amzn.to/2PEAqE7
Digital Multimeter:
https://amzn.to/2QGRPg1
Top Soldering iron kits: "best"
https://amzn.to/39nqDtb
3D printers:
https://amzn.to/3ruG1dt
CNC Machines:
https://amzn.to/3cuZWVv
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for your support!
****************
For more Projects and tutorials visit my Websites
Electronic Clinic:
https://www.electroniclinic.com/
Programming Digest:
https://programmingdigest.com/
Follow me on Instagram:
Instagram: electroniclinic
Follow my Facebook Page Electronic Clinic:
https://web.facebook.com/profile.php?...
Follow my Facebook Group, Arduino Projects:
Facebook: 190031841821771
Email:
[email protected]
#hydroponicsystem #esp32project #hydroponic
2 ماه پیش
در تاریخ 1403/03/08 منتشر شده
است.
2,319
بـار بازدید شده