Making a soft plastic fishing lure, The whip tail grub and injection mould
101.2 هزار بار بازدید -
7 سال پیش
-
I think I am going
I think I am going round in circles but there is never anything wrong with making whip tail or curly tail grubs, let us be honest anything with teeth or a set of gums and fins is either going to want to bite them or give them a nasty suck. Fishing lure fashions come and go but these simple baits have stood the test of time so it was great to try out some of my new mould making techniques and make a step up from the humble worm.
Hand pouring whip tail grubs is always a bit of a compromise as I can never get the tail to standard thickness but with an injection mould this is no problem. Also that combination of polyurethane resin and aluminium means the lures cool quickly so the mould can be set up again for the next round.
Materials
Polymer clay; there are two main brands of this Fimo and sculpey both easy to get hold of from art shops or online.
the resin I used was Easyflo 60 from ebay it can be bought small amounts normally
aluminium powder was again bought from eBay but is standard filler for lots of resins
Some companies like Makelure.com produce ready mixed resins with Aluminium powder, like VAC 50
Soft plastic liquid can be bought from a number suppliers
Europe https://www.brightbaits.com
UK http://lurefactors.co.uk/ https://lure-solutions.co.uk
USA Lureparts.com https://Makelure.com Bearsbaits.com jannsnetcraft.com
A massive thanks to my Patreon Patrons, If you would like to support this channel and help me make videos then you can donate at Patreon https://www.patreon.com/user?u=661130
My Youtube channel Is https://www.seevid.ir/fa/result?ytch=UCHsV...
Handmade Fisherman Blog http://homeluremaking.blogspot.co.uk/
My facebook Facebook: paul.adams.3..
Instagram https://www.instagram.com/paulpadam/?...
If you need Lure template E-mail [email protected]
Music by; Sappheiros Tracks, Falling and Dawn
link to tracks
SoundCloud: falling-ft-esoreni
SoundCloud: dawn
Hand pouring whip tail grubs is always a bit of a compromise as I can never get the tail to standard thickness but with an injection mould this is no problem. Also that combination of polyurethane resin and aluminium means the lures cool quickly so the mould can be set up again for the next round.
Materials
Polymer clay; there are two main brands of this Fimo and sculpey both easy to get hold of from art shops or online.
the resin I used was Easyflo 60 from ebay it can be bought small amounts normally
aluminium powder was again bought from eBay but is standard filler for lots of resins
Some companies like Makelure.com produce ready mixed resins with Aluminium powder, like VAC 50
Soft plastic liquid can be bought from a number suppliers
Europe https://www.brightbaits.com
UK http://lurefactors.co.uk/ https://lure-solutions.co.uk
USA Lureparts.com https://Makelure.com Bearsbaits.com jannsnetcraft.com
A massive thanks to my Patreon Patrons, If you would like to support this channel and help me make videos then you can donate at Patreon https://www.patreon.com/user?u=661130
My Youtube channel Is https://www.seevid.ir/fa/result?ytch=UCHsV...
Handmade Fisherman Blog http://homeluremaking.blogspot.co.uk/
My facebook Facebook: paul.adams.3..
Instagram https://www.instagram.com/paulpadam/?...
If you need Lure template E-mail [email protected]
Music by; Sappheiros Tracks, Falling and Dawn
link to tracks
SoundCloud: falling-ft-esoreni
SoundCloud: dawn
7 سال پیش
در تاریخ 1396/08/09 منتشر شده
است.
101,288
بـار بازدید شده