LIDL glider RC conversion - TWIN TURBO LIDL - Build Video
337.4 هزار بار بازدید -
3 سال پیش
-
This is a LIDL chuck
This is a LIDL chuck glider conversion into a twin motor RC plane. I call it the "TWIN TURBO LIDL". The time lapse build video will show you the complete build of a 7,99 EUR kids toy into a fast and highly maneuverable RC plane. With the video and my information below (parts list, plan, STL files) you can also build your own one. If you haven't got a LIDL glider just wait until around May/June where LIDL will have them on sale in the store and in their online shops ... every year!
Link to the flight video: Flight Video - LIDL glider RC convers...
Links to my other LIDL glider conversion videos:
LIDL A-10: The ultimate LIDL glider RC conversio...
LIDL DEVIL: Build Video - RC conversion of a LIDL...
LIDL Version 1: Pushing the LIDL Glider to 145 km/h
Specs:
Wingspan: 860mm
Length: 680mm
Wing area: 11.9 dm2
Weight (AUW): 580g (in my configuration)
RC functions: elevator, ailerons, motor, differential thrust
CG: 60mm from leading edge
My configuration:
Basic plane: LIDL Playtive Glider (2021 version)
Motor: 2x Graupner Ultra 2806 2300kv brushless motor (2206 stator)
Prop: 2x HQ 3-blade 5x4,3
Battery: SLS Quantum 1800mAh 3S 30C/60C
ESC: 2x Graupner Brushless Control + T 18 XT-60
Receiver: Graupner GR-12 HoTT, 6 channel
Servos: 3x Emax ES08D II
Other parts and material:
Carbon fiber tube 5 x 4mm
Carbon fiber rod 1 x 3mm
Piano wire 1,0mm for control rods
BBQ Skewer (bamboo)
Y-Cable XT-60 (homemade)
Servo extension 300mm
Clear packing tape: tesapack Packband "Crystal Clear"
Beech rod diameter 5mm for canopy locking
Plywood 1.5mm for canopy locking
Canopy Lock (Pichler Extron): https://extron.pichler.de/Canopy-Lock...
PU glue
Screws for attaching motors: M3x4mm
Stickers: d-c-fix vinyl silver (mat) and white (mat)
Painters tape (for making the markings): tesa Perfect
Painters tape blue (hot glue doesn't stick to it and doesn't melt it): tesa Malerband für Lacke
Link to plan: https://drive.google.com/file/d/1xRXu...
Link to free STL files for 3D printed parts (control horn, form part under powerpod): https://drive.google.com/file/d/1CPDR...
Link to powerpod (MT2206_16x19mm_Standard): https://www.thingiverse.com/thing:109...
Note: If you don't have a 3D printer you can easily make these parts from plywood and balsa wood
Note: This video is not sponsored. I only recommend the stuff I used and that worked well for me.
Tools:
Dremel 3000
Dremel Carving Bit (193) + Multipurpose Cutting Kit (565)
Dremel Multipurpose Carving Bit (561)
Cutting machine:
BROTHER ScanNCut SDX1000
Camera:
Sony HDR-CX730
Microphone:
Rode NTUSB
Link to the flight video: Flight Video - LIDL glider RC convers...
Links to my other LIDL glider conversion videos:
LIDL A-10: The ultimate LIDL glider RC conversio...
LIDL DEVIL: Build Video - RC conversion of a LIDL...
LIDL Version 1: Pushing the LIDL Glider to 145 km/h
Specs:
Wingspan: 860mm
Length: 680mm
Wing area: 11.9 dm2
Weight (AUW): 580g (in my configuration)
RC functions: elevator, ailerons, motor, differential thrust
CG: 60mm from leading edge
My configuration:
Basic plane: LIDL Playtive Glider (2021 version)
Motor: 2x Graupner Ultra 2806 2300kv brushless motor (2206 stator)
Prop: 2x HQ 3-blade 5x4,3
Battery: SLS Quantum 1800mAh 3S 30C/60C
ESC: 2x Graupner Brushless Control + T 18 XT-60
Receiver: Graupner GR-12 HoTT, 6 channel
Servos: 3x Emax ES08D II
Other parts and material:
Carbon fiber tube 5 x 4mm
Carbon fiber rod 1 x 3mm
Piano wire 1,0mm for control rods
BBQ Skewer (bamboo)
Y-Cable XT-60 (homemade)
Servo extension 300mm
Clear packing tape: tesapack Packband "Crystal Clear"
Beech rod diameter 5mm for canopy locking
Plywood 1.5mm for canopy locking
Canopy Lock (Pichler Extron): https://extron.pichler.de/Canopy-Lock...
PU glue
Screws for attaching motors: M3x4mm
Stickers: d-c-fix vinyl silver (mat) and white (mat)
Painters tape (for making the markings): tesa Perfect
Painters tape blue (hot glue doesn't stick to it and doesn't melt it): tesa Malerband für Lacke
Link to plan: https://drive.google.com/file/d/1xRXu...
Link to free STL files for 3D printed parts (control horn, form part under powerpod): https://drive.google.com/file/d/1CPDR...
Link to powerpod (MT2206_16x19mm_Standard): https://www.thingiverse.com/thing:109...
Note: If you don't have a 3D printer you can easily make these parts from plywood and balsa wood
Note: This video is not sponsored. I only recommend the stuff I used and that worked well for me.
Tools:
Dremel 3000
Dremel Carving Bit (193) + Multipurpose Cutting Kit (565)
Dremel Multipurpose Carving Bit (561)
Cutting machine:
BROTHER ScanNCut SDX1000
Camera:
Sony HDR-CX730
Microphone:
Rode NTUSB
3 سال پیش
در تاریخ 1400/10/27 منتشر شده
است.
337,463
بـار بازدید شده