How to use Infinity CM2 MTK to flash Mediatek firmware
52.7 هزار بار بازدید -
7 سال پیش
-
Download links & Text format
Download links & Text format @ https://forum.hovatek.com/thread-2182...
This video explains how to use Infinity CM2 to flash firmware to a Mediatek (MTK) device
Its important to only flash firmware for your device to avoid bricking it
Drop a comment below if you have questions or reach out to us on the following platforms:
Website: https://www.hovatek.com
Facebook: Facebook: hovatek
Twitter: Twitter: hovatek
Google+ : https://plus.google.com/+Hovatek
00:10
In this video tutorial, I'll be explaining how to flash a Mediatek Android phone using Chinese Miracle 2 MTK
00:18
module. You need to have the module which you're going to be installing and the firmware which you're
00:27
going to be flashing. I'll be flashing in scatter format as you can see. You should also have your
00:34
VCOM drivers installed, we have a guide on how to do that so check that out on our Forum.
00:39
Now, once you've done that, install this CM2 MTK module. You should have the hardware dongle
00:53
on standby. If possible, you can have it connected to your PC while you're installing the module ok?
01:02
So you don't forget to connect when you launch. [installing both MTK modules]
01:39
Now, make sure your dongle is connected to the PC's USB port then launch the Infinity CM2 MTK shortcut.
01:52
It takes a while to come up so just be patient alright? Now, select your phone's chipset
02:11
under Settings - CPU. We have a guide on how to know your phone's chipset. Now, once you do that,
02:16
you go to the flash tab. Depending on what you want to flash (bin or scatter format), you tick
02:23
the appropriate radio. I want to flash in scatter format so I'm going to be ticking scatter.
02:29
Now, under Settings, you have some boxes. I'm going to untick everything. You can decide to tick any.
02:38
Once you're done with that, you click on Scatter and then a Window should popup. Now, in this Window that
02:45
pops up, navigate to the location where you have your firmware / rom which you want to flash
02:53
then select the scatter file and click on Open. Now, the firmware / rom should get detected.
03:02
Now, click on Flash and you should have ====Wait for phone.. Power off the phone. still with battery inside
03:18
then connect it to the PC via the USB cord and you should have detection. Flashing should begin.
03:27
Its very important you don't interrupt flashing ok? Alright! Great! So flashing is done.
03:38
That's basically how to flash a Mediatek Android phone using Chinese Miracle 2 or CM2 MTK module.
This video explains how to use Infinity CM2 to flash firmware to a Mediatek (MTK) device
Its important to only flash firmware for your device to avoid bricking it
Drop a comment below if you have questions or reach out to us on the following platforms:
Website: https://www.hovatek.com
Facebook: Facebook: hovatek
Twitter: Twitter: hovatek
Google+ : https://plus.google.com/+Hovatek
00:10
In this video tutorial, I'll be explaining how to flash a Mediatek Android phone using Chinese Miracle 2 MTK
00:18
module. You need to have the module which you're going to be installing and the firmware which you're
00:27
going to be flashing. I'll be flashing in scatter format as you can see. You should also have your
00:34
VCOM drivers installed, we have a guide on how to do that so check that out on our Forum.
00:39
Now, once you've done that, install this CM2 MTK module. You should have the hardware dongle
00:53
on standby. If possible, you can have it connected to your PC while you're installing the module ok?
01:02
So you don't forget to connect when you launch. [installing both MTK modules]
01:39
Now, make sure your dongle is connected to the PC's USB port then launch the Infinity CM2 MTK shortcut.
01:52
It takes a while to come up so just be patient alright? Now, select your phone's chipset
02:11
under Settings - CPU. We have a guide on how to know your phone's chipset. Now, once you do that,
02:16
you go to the flash tab. Depending on what you want to flash (bin or scatter format), you tick
02:23
the appropriate radio. I want to flash in scatter format so I'm going to be ticking scatter.
02:29
Now, under Settings, you have some boxes. I'm going to untick everything. You can decide to tick any.
02:38
Once you're done with that, you click on Scatter and then a Window should popup. Now, in this Window that
02:45
pops up, navigate to the location where you have your firmware / rom which you want to flash
02:53
then select the scatter file and click on Open. Now, the firmware / rom should get detected.
03:02
Now, click on Flash and you should have ====Wait for phone.. Power off the phone. still with battery inside
03:18
then connect it to the PC via the USB cord and you should have detection. Flashing should begin.
03:27
Its very important you don't interrupt flashing ok? Alright! Great! So flashing is done.
03:38
That's basically how to flash a Mediatek Android phone using Chinese Miracle 2 or CM2 MTK module.
7 سال پیش
در تاریخ 1396/11/04 منتشر شده
است.
52,700
بـار بازدید شده