How to replace the Front Brakes 2009-2014 Ford F150 🚗
5 هزار بار بازدید -
پارسال
-
Find the parts used in
Find the parts used in the video on CarParts.com just there https://carparts.solutions/F150
⚙️ NEEDED CARPARTS AND PRODUCTS
- Brake pads : https://bit.ly/brakepadsSSCP1414us
- Brake rotors : https://bit.ly/brakediscsstpf27110040us
- Anti-rattle clips
- Brake cleaner : https://carparts.solutions/BrakeCleaner
- Copper grease
💪 TIGHTENING TORQUES
- Brake cliper mount bolts : 184 Ft-lbs
- Slide pins : 27 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Ford F-150 :
- https://carparts.solutions/ToolBox
List of the tools we used to replace the front discs and pads on a Ford F-150 :
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Big flat head screwdriver
- Ratchet
- 13mm socket
- Clamp or iron wire
- Flat head screwdriver
- 21mm socket
- Hammer
- Wire brush
- Paper towel
- File
- Torque wrench : https://carparts.solutions/TorqueWren...
- Brake Wind-Back Tool : https://carparts.solutions/BrakePisto...
- 17mm spanner
Don't forget to subscribe : @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 Ford F150
- 2010 Ford F150
- 2011 Ford F150
- 2012 Ford F150
- 2013 Ford F150
- 2014 Ford F150
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Ford F-150 safely : How to jack your Ford F150 safely ? ⬆ 🚗
⚠️ CARPARTS.COM'S INFOS
- Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.
- Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.
- When replacing brake discs, you also need to replace the brake pads. This is a mandatory procedure.
- Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Remove the pads
2:18 Remove the rotor
3:05 Replace the rotor
5:05 Insert the new pads
7:18 Tips
⚙️ NEEDED CARPARTS AND PRODUCTS
- Brake pads : https://bit.ly/brakepadsSSCP1414us
- Brake rotors : https://bit.ly/brakediscsstpf27110040us
- Anti-rattle clips
- Brake cleaner : https://carparts.solutions/BrakeCleaner
- Copper grease
💪 TIGHTENING TORQUES
- Brake cliper mount bolts : 184 Ft-lbs
- Slide pins : 27 Ft-lbs
🛠 TOOLS
The toolbox recommended by CARPARTS.COM to repair your Ford F-150 :
- https://carparts.solutions/ToolBox
List of the tools we used to replace the front discs and pads on a Ford F-150 :
- Hydraulic jack : https://carparts.solutions/FloorJack
- Jack stands : https://carparts.solutions/JackStands
- Wheel lug wrench
- Big flat head screwdriver
- Ratchet
- 13mm socket
- Clamp or iron wire
- Flat head screwdriver
- 21mm socket
- Hammer
- Wire brush
- Paper towel
- File
- Torque wrench : https://carparts.solutions/TorqueWren...
- Brake Wind-Back Tool : https://carparts.solutions/BrakePisto...
- 17mm spanner
Don't forget to subscribe : @carpartscomofficial
🛻 COMPATIBLE VEHICLES
The operation and tools displayed in the video should be available on the following vehicles :
- 2009 Ford F150
- 2010 Ford F150
- 2011 Ford F150
- 2012 Ford F150
- 2013 Ford F150
- 2014 Ford F150
📽 🛠 USEFUL VIDEOS 🛠 📽
- How to jack your Ford F-150 safely : How to jack your Ford F150 safely ? ⬆ 🚗
⚠️ CARPARTS.COM'S INFOS
- Once the operation is completed, you'll need pump slowly on the brake pedal a few times until feeling a strong resistance from the pedal. The aim being to bring the brake pads closer to one other.
- Don't burn yourself on the pads if you've just gone for a drive as braking creates friction and long-lasting heat.
- When replacing brake discs, you also need to replace the brake pads. This is a mandatory procedure.
- Drive smoothly and avoid sudden braking for the first 30 miles or so, to avoid glazing the new pads.
What do we mean by "glazing new brake pads"? Brake pads are made of a material that needs to be run-in when new. If this procedure is not done properly, when braking too hard, the material overheats and hardens. Consequently, the brakes become less effective.
🚨 DISCLAIMER
This video is for entertainment purposes only. Carparts.com, Inc. disclaims all damages including, but not limited to, actual, consequential, and/or punitive, for any liability, claim, or any other injury or cause related to or arising from any information or lack thereof posted in this video. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All mechanical car projects entail some risk. It is the sole responsibility of the viewer to assume this risk. If you are in doubt, please consult a licensed mechanic in your area.
📚 CHAPTERS
0:00 Intro
0:10 Remove the pads
2:18 Remove the rotor
3:05 Replace the rotor
5:05 Insert the new pads
7:18 Tips
پارسال
در تاریخ 1401/12/20 منتشر شده
است.
5,084
بـار بازدید شده