How to expose SLOG3 using Exposure Indexes (Sony FS7/FX9)

Robert Machado
Robert Machado
62.7 هزار بار بازدید - 4 سال پیش - Find full-length BTS on Patreon:
Find full-length BTS on Patreon:
Patreon: machadovisuals

Using exposure indexes are a great way to achieve clean images when using S-Log. The video portrait towards the middle of the video was shot using 200 EI. You technically CAN bake in your exposure index on the FX9, you'd just have to use S-Log3 as your mLUT and bake it into the internal recording. If you don't want to view LOG while monitoring, you'll have to use Gamma Display Assist (ew) or use an external monitor. It's surprising how many people still use Slog2; Slog3 has a higher middle grey (thus slightly noisier), but it has 1.5 stops more dynamic range. This is why Slog2 isn't even found on the FX9; it literally has too much dynamic range.

YouTube compression was not very forgiving to this video! Here's a link to a Vimeo version to better see the reduced noise floor: https://vimeo.com/454965176/3352be9127


Video Portrait - https://vimeo.com/451394794/119f55e4f0

FX9 Guide: CineEI - FX9 Guide Version 2 | Cine EI | FX9 |...

Get 2 free months with an annual subscription!
Artlist: http://bit.ly/2VaR7I8
Artgrid: http://bit.ly/32fh3Ux

Video gear I use: https://kit.co/robchado

Follow me on the socialz:
Instagram: robchado
Twitter: robchado

MB01RBA5KACSRHW
4 سال پیش در تاریخ 1399/06/14 منتشر شده است.
62,704 بـار بازدید شده
... بیشتر