How to clean tv remote control / How to disassemble TV remote control / LG TV remote control / #DIY

The TV remote control is dirty or does not work well, clean it correctly! Every day the control panel from the TV is taken in hand by all household members. Over time, dust, grease, and other dirt accumulate on it, clogging between the buttons, penetrating into the interior of the device. As a result, the buttons begin to stick, the contacts inside the remote control oxidize. He then fails. You can avoid all this if you properly disassemble and clean the remote control from the TV outside and inside. We'll show you how to get a very dirty TV remote back to work. Cleaning the TV remote control or any other electronic equipment is very easy! https://www.seevid.ir/fa/w/Y6IppRie7os ► 1. Dismantling the remote control. Before disassembling the remote control, remove the batteries from the special compartment. To open the case, a special tool or a thin plastic card is inserted into the gap between the front and back panels and held along the entire perimeter of the console. As a result, the halves will separate and open access to the board and buttons. Usually the rubber buttons are loose. Therefore, they are simply removed. https://www.seevid.ir/fa/w/Y6IppRie7os ► 2. Cleaning and washing the remote control buttons. The rubber buttons must be washed with soap or dish detergent, alcohol-containing agents must not be used! We clean with a toothbrush in hard-to-reach places. To remove residual soap solution, rinse the parts under running water. Wipe with paper towels and then place on a clean towel or paper towels to dry overnight. Alcohol cannot be used for rubber buttons! https://www.seevid.ir/fa/w/Y6IppRie7os ► 3. Cleaning the board. You need to remove dirt with alcohol or a special liquid for cleaning electronic devices or a regular stationery eraser. If alcohol is used, it is moistened with a cotton pad or cloth and gently, without pressure, wipe the device. After wiping the board from both sides, spread it on a paper towel and leave to dry. https://www.seevid.ir/fa/w/Y6IppRie7os ► 4. Assembling the console. The remote control disassembled into parts is collected back after all the dirt has been washed off and the components are completely dry. We recommend subscribing to our channel: https://goo.gl/Ho6EW8 Interesting videos: How to disassemble a light bulb: https://www.seevid.ir/fa/w/Hw9aa2HZZic How to make a projector for smartphones: https://www.seevid.ir/fa/w/EhTs-mjB8GQ Subscribe: Lifekaki Channel: Facebook: https://www.facebook.com/LifeKaki/ Twitter: https://twitter.com/LifeKaki_ Subscribe to our channel: https://goo.gl/Ho6EW8 #tv #remote #cleaning How to clean a TV remote control. How to disassemble a TV remote control LG AKB74475404. How to clean tv remote control / Como limpiar un mando a distancia / LG remote control

• #science_technology
• #diy
• #lg
• #lg_remote_control
• #lg_smart_tv
• #how_to_disassemble_tv_remote
• #
• #
• #lifekaki
• #
• #
• #
• #
• #akb74475404
• #lg_tv_remote_control
• #
• #lg_remote
• #how_to_clean_tv_remote_control
• #remote_control_cleaning
• #manualidades_navideas_2021
• #
• #
• #
• #mthb_b_ltkfq
• #ideas_en_5_minutos
• #
• #how_to_clean_tv_remote
• #lg_remote_not_working
• #homemaking