Drilling Eleven Hundred 0.5 mm Holes in Less Than an Hour with IPG LaserCube
12.5 هزار بار بازدید -
5 سال پیش
-
Drilling small holes through thick
Drilling small holes through thick stainless steel is always a problem. Now imagine drilling ELEVEN HUNDRED 0.5 mm holes. LaserCube easily and consistently drills clean holes with no tool breakage.
An industrial machine shop job included shaping a circular part form 200 mil stainless steel, thinning a section down to 0.120" then drilling 1100 holes.
Do you have any questions about LaserCube or laser cutting in general?
Website: http://bit.ly/lasercube-drilling
Email: [email protected]
Phone: (844) 474-2823
#IPGPhotonics #LaserCube #lasercutting
An industrial machine shop job included shaping a circular part form 200 mil stainless steel, thinning a section down to 0.120" then drilling 1100 holes.
Do you have any questions about LaserCube or laser cutting in general?
Website: http://bit.ly/lasercube-drilling
Email: [email protected]
Phone: (844) 474-2823
#IPGPhotonics #LaserCube #lasercutting
5 سال پیش
در تاریخ 1398/07/24 منتشر شده
است.
12,558
بـار بازدید شده