How to Fix the Mic and properly setup the Astro A40/Mixamp Pro TR combo (2021)

I should also mention that you should use your xbox button to power it on not your controller button from now on. Your xbox needs to recognize the mixamp before the controller to prevent another hard reset to be needed for recognition. Leave any Questions in the Comments. Here are all the steps again: Download update from astro command center and make sure your mixamp is in pc mode when you connect it to your laptop/computer. Make sure the side of the cord for your headset that has 4 black rings goes in the headset side 2) Make sure you have it usb plugged into the back of xbox for me it only works in the middle port that accepts usb. 3) All cables must be fully plugged in. 4) THIS IS MOST IMPORTANT. HARD RESET YOUR XBOX. YOU DO NOT NEED TO USE YOUR AUX PORT AT ALL TO MAKE IT WORK. You do not need to plug anything into your controller. 5) Once you are booted back up after the reset it should recognize your headset. Make sure you flip the switch back into xbox mode after your pc update. You can use your aux port for auxing music now and still use a mic simultaneousy. This should do it!