Setting up and installing a humidity pump on a Brinsea Octagon 20 (or Octagon 40) Advance incubator

This relatively short video is to support customers who have purchased an Octagon 20 or Octagon 40 Advance EX (with the pump) or have decided to purchase a pump later and connect it to the Octagon 20 or Octagon 40 Advance for more precise humidity control. The video focuses on the Octagon 20 Advance and includes a section on the Octagon 40 pump set-up where this is slightly different. (The entry point for the plastic tube which feeds water into the machine is different on the Octagon 40 and the '40' does not require the yellow fishbone clips for holding the evaporating card because clips are moulded into the lid). Note the Octagon 40 is a bigger machine so it also has extra wire dividers, extra foam cushions and an extra foam cushion pad for lining the extra egg tray. Full instructions are also downloadable from our website.

• #pets_animals
• #brinsea
• #octagon_20_ex
• #octagon_40_ex
• #octagon_40_advance
• #octagon_20_advance
• #humidity
• #humidity_pump
• #silicon_tubing
• #evaporating_pads
• #evaporating_cards