How to Replace Front Lower Control Arm 2008-12 Chevy Malibu
76.9 هزار بار بازدید -
4 سال پیش
-
Buy Now!New Control Arm with
Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASLF00182
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2012 Chevy Malibu.
• Check here for more videos on the 2008-12 Chevy Malibu: Chevy Malibu 2008-2012 7th Generation
This process should be similar on the following vehicles:
2004 Chevrolet Malibu
2005 Chevrolet Malibu
2006 Chevrolet Malibu
2007 Chevrolet Malibu
2008 Chevrolet Malibu
Tools you will need:
• 14mm Wrench http://1aau.to/oa/1AXAA00010
• 16mm Wrench
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 15mm Socket http://1aau.to/oa/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Pickle Fork
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Liquid Thread Locker
• Marker / Writing Utensil
• Rust Penetrant
• Center Punch http://1aau.to/oa/1AXAA00055
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Rubber Mallet http://1aau.to/oa/1AXAA00413
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Chevy Malibu 2008-2012 7th Generation: Chevy Malibu 2008-2012 7th Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ib/1ASLF00182
Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear. This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2012 Chevy Malibu.
• Check here for more videos on the 2008-12 Chevy Malibu: Chevy Malibu 2008-2012 7th Generation
This process should be similar on the following vehicles:
2004 Chevrolet Malibu
2005 Chevrolet Malibu
2006 Chevrolet Malibu
2007 Chevrolet Malibu
2008 Chevrolet Malibu
Tools you will need:
• 14mm Wrench http://1aau.to/oa/1AXAA00010
• 16mm Wrench
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 15mm Socket http://1aau.to/oa/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Pickle Fork
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• Ratchet http://1aau.to/oa/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Liquid Thread Locker
• Marker / Writing Utensil
• Rust Penetrant
• Center Punch http://1aau.to/oa/1AXAA00055
• Floor Jack http://1aau.to/oa/1AXAA00068
• Hammer http://1aau.to/oa/1AXAA00091
• Jack Stands http://1aau.to/oa/1AXAA00065
• Rubber Mallet http://1aau.to/oa/1AXAA00413
• Wheel Chocks
Subscribe: @trq
Check out our playlist:
Chevy Malibu 2008-2012 7th Generation: Chevy Malibu 2008-2012 7th Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
4 سال پیش
در تاریخ 1399/05/30 منتشر شده
است.
76,924
بـار بازدید شده