Lathe double de-clutch.
276 بار بازدید -
2 ماه پیش
-
This is the gearchoice.comp LinuxCNC
This is the gearchoice.comp LinuxCNC HAL component in action. It attempts to synchronise the shaft speeds when a change in range is needed like a skilled driver can with a crash gearbox.
It works better on downshifts than upshifts as I haven't fitted a braking resistor or really optimised the motor braking in the VFD.
2 ماه پیش
در تاریخ 1403/04/23 منتشر شده
است.
276
بـار بازدید شده