How to Re-Ink or Refill a Trodat Self-Inking Stamp
202 هزار بار بازدید -
8 سال پیش
-
If your stamp impressions are
If your stamp impressions are getting light, simply re-ink your stamp pad! Follow the steps below:
The life of your stamp can be prolonged by adding ink to the ink pad.
1 - Turn the stamp so that the logo is facing away from you.
2 - Push the stamp down slightly to raise the text piece off of the ink pad.
3 - Using your thumb and index finger, pull the pad out.
4 - Flip the pad over, and add 5-10 drops of Trodat ink to the pad. It is important to use the correct brand of ink when re-inking your stamp.
5 - Once the ink has absorbed, flip the pad back over so the inked side is facing down.
6 - Press down on the stamp slightly, and insert the pad back in to the stamp.
Find Trodat Self Inking Stamps here: https://www.thestampmaker.com/rubber-...
The life of your stamp can be prolonged by adding ink to the ink pad.
1 - Turn the stamp so that the logo is facing away from you.
2 - Push the stamp down slightly to raise the text piece off of the ink pad.
3 - Using your thumb and index finger, pull the pad out.
4 - Flip the pad over, and add 5-10 drops of Trodat ink to the pad. It is important to use the correct brand of ink when re-inking your stamp.
5 - Once the ink has absorbed, flip the pad back over so the inked side is facing down.
6 - Press down on the stamp slightly, and insert the pad back in to the stamp.
Find Trodat Self Inking Stamps here: https://www.thestampmaker.com/rubber-...
8 سال پیش
در تاریخ 1395/05/26 منتشر شده
است.
202,072
بـار بازدید شده