ANSYS Meshing Full Free Course, Session 2.3: Sweep Method
2.7 هزار بار بازدید -
2 سال پیش
-
In this episode, we have
In this episode, we have talked about SWEEP Method in ANSYS Meshing software.
ANSYS Meshing course is a free course provided by MR CFD in 24 episodes for all CFD users. In this course, you will thoroughly learn how to mesh a 2D/3D geometry model to be used for your CFD/structural simulation stage. Namely, different types of mesh/grids including, unstructured, hybrid, structured, and multiple ways how to carry each out are illustrated. You will be first familiarized with different types of mesh and the geometries over which these specific mesh types are applied. Then building upon that knowledge, we will teach you the tricks and tips on how to create the mentioned mesh or grids. This Course is presented so that it is as practical as possible so that the graduates after the end of the Course can work well with this software to generate high-quality mesh for the geometries required for CFD works.
2 سال پیش
در تاریخ 1401/12/01 منتشر شده
است.
2,772
بـار بازدید شده