1.7 MW megawatt (~ 2280 hp) - big electric motor start
395.2 هزار بار بازدید -
4 سال پیش
-
See the start-up of a
See the start-up of a 1.7 MW, 6 kV squirrel cage motor from 0 to 1486 min-1 at our test field. The motor was set up for noise level measurement in our Berlin test field. In this case the motor start was carried out uncoupled and without a half key. Vibration values and noise levels are within the specified tolerance range.
0:00 epic intro
0:23 cables are being connected
0:46 big electric motor start
2:05 our engineers check the details
2:27 technical data of the 1.7 megawatt motor
2:34 end card
This electric motor project was about a particularly fast delivery from stock. The order came from a European oil company where a pump motor had failed. The squirrel cage motor shown here in foot design IM 1001 (IM B3) has a welded steel construction with side terminal boxes, one shaft end, and grease-lubricated roller bearings. It is designed for Zone 2 explosion-proof areas and has a tube-jacket-air-air heat exchanger. Its internal air cooling circuit is driven by internal fans mounted on the shaft. The external heat is dissipated to the ambient air via the tubular heat exchanger in the housing and the external fan installed on the NDE (cooling type IC 511).
Technical data of the 1.7 megawatt motor
• Menzel Motor type: MEBKSHN710-04
• Explosion-proof non-sparking II3G Ex nA IIC T3 Gc for use in gas Ex zone 2
• Standard: IEC / EN 60034-1
• Nominal power output: 1.7 MW megawatt (1700 kW)
• Nominal voltage: 6 kv (6000 V)
• Nominal speed: 1486 min-1
• Size: 710
• Mounting: IM B3
• Protection: IP54
• Cooling: IC511
• Weight: 7300kg
This electric motor test bench is located in Berlin, Germany. Here we offer tests of electric motors and generators, transformer, inverter, motor systems, gear units and frequency transformers as a service – also for external clients. Our test field enables tests up to 1800 kW under load and up to 10 MW at no load speed. It is equipped with modern electronic and mechanical measuring technology and suitable for routine tests, type tests, and complex system checks. It features inverters with a 6 kV performance, rotary converters for all standard voltages up to 13.8 kV, and load resistors for testing generators.
Menzel manufactures big industrial motors for various applications in the petrochemical industry: pump drives, compressor or fan motors. Menzel also builds customer-specific drive solutions and custom-made motors in the power range up to 25 Megawatt. Menzel AC motors and DC motors are used wherever large and heavy masses have to be moved. On request, MENZEL can replicate existing motors of all types and power classes identically - from a 100 kW crane motor to a mill drive in the megawatt range.
Are you looking for a quick replacement motor for your industrial plant? We would be happy to advise you – just contact us!
►►► https://www.menzel-motors.com/
LinkedIn
►►► LinkedIn: menzel-motors
Twitter
►►► Twitter: MenzelMotors
Newsletter
►►► https://www.menzel-motors.com/newslet...
MENZEL Elektromotoren GmbH
Neues Ufer 19-25
10553 Berlin (Germany)
[email protected]
Tel. +49303499220
0:00 epic intro
0:23 cables are being connected
0:46 big electric motor start
2:05 our engineers check the details
2:27 technical data of the 1.7 megawatt motor
2:34 end card
This electric motor project was about a particularly fast delivery from stock. The order came from a European oil company where a pump motor had failed. The squirrel cage motor shown here in foot design IM 1001 (IM B3) has a welded steel construction with side terminal boxes, one shaft end, and grease-lubricated roller bearings. It is designed for Zone 2 explosion-proof areas and has a tube-jacket-air-air heat exchanger. Its internal air cooling circuit is driven by internal fans mounted on the shaft. The external heat is dissipated to the ambient air via the tubular heat exchanger in the housing and the external fan installed on the NDE (cooling type IC 511).
Technical data of the 1.7 megawatt motor
• Menzel Motor type: MEBKSHN710-04
• Explosion-proof non-sparking II3G Ex nA IIC T3 Gc for use in gas Ex zone 2
• Standard: IEC / EN 60034-1
• Nominal power output: 1.7 MW megawatt (1700 kW)
• Nominal voltage: 6 kv (6000 V)
• Nominal speed: 1486 min-1
• Size: 710
• Mounting: IM B3
• Protection: IP54
• Cooling: IC511
• Weight: 7300kg
This electric motor test bench is located in Berlin, Germany. Here we offer tests of electric motors and generators, transformer, inverter, motor systems, gear units and frequency transformers as a service – also for external clients. Our test field enables tests up to 1800 kW under load and up to 10 MW at no load speed. It is equipped with modern electronic and mechanical measuring technology and suitable for routine tests, type tests, and complex system checks. It features inverters with a 6 kV performance, rotary converters for all standard voltages up to 13.8 kV, and load resistors for testing generators.
Menzel manufactures big industrial motors for various applications in the petrochemical industry: pump drives, compressor or fan motors. Menzel also builds customer-specific drive solutions and custom-made motors in the power range up to 25 Megawatt. Menzel AC motors and DC motors are used wherever large and heavy masses have to be moved. On request, MENZEL can replicate existing motors of all types and power classes identically - from a 100 kW crane motor to a mill drive in the megawatt range.
Are you looking for a quick replacement motor for your industrial plant? We would be happy to advise you – just contact us!
►►► https://www.menzel-motors.com/
►►► LinkedIn: menzel-motors
►►► Twitter: MenzelMotors
Newsletter
►►► https://www.menzel-motors.com/newslet...
MENZEL Elektromotoren GmbH
Neues Ufer 19-25
10553 Berlin (Germany)
[email protected]
Tel. +49303499220
4 سال پیش
در تاریخ 1399/07/26 منتشر شده
است.
395,219
بـار بازدید شده