Making A TAP Follower - Should Have Made It a long Time Ago
91.3 هزار بار بازدید -
10 ماه پیش
-
G'day everyone,To finish up this
G'day everyone,
To finish up this small build series I have done on taps and tap wrenches, I wanted to build a tap follower. They are a popular first tool to make on the lathe, and for good reason. They help you tap parts perfectly straight. it is essentially a spring loaded center which locates into the centers in your taps. Helps you tap straight, which is pretty helpful on the lathe.
Now for my set up wanted a very specific design. The body had to be a morse 3 taper, to suit the lathe and the mill. I also wanted to move away from the stepped piston design. I think its adds a extra machining time that isn't necessary for the desired result.
Tap follower build
Making a tap follower
#machining #diy
Timestamps
0:00 - Intro
3:05 - Design and Tolerances
6:02 - Making The Tap Follower
12:47 - Assembly And Testing
To finish up this small build series I have done on taps and tap wrenches, I wanted to build a tap follower. They are a popular first tool to make on the lathe, and for good reason. They help you tap parts perfectly straight. it is essentially a spring loaded center which locates into the centers in your taps. Helps you tap straight, which is pretty helpful on the lathe.
Now for my set up wanted a very specific design. The body had to be a morse 3 taper, to suit the lathe and the mill. I also wanted to move away from the stepped piston design. I think its adds a extra machining time that isn't necessary for the desired result.
Tap follower build
Making a tap follower
#machining #diy
Timestamps
0:00 - Intro
3:05 - Design and Tolerances
6:02 - Making The Tap Follower
12:47 - Assembly And Testing
10 ماه پیش
در تاریخ 1402/07/08 منتشر شده
است.
91,374
بـار بازدید شده