EZ-Brace Installation Video. How to fix a sagging wood fence gate. Easy to install gate hardware kit
141.8 هزار بار بازدید -
14 سال پیش
-
Never wrestle with your gate
Never wrestle with your gate again!
You can remove sag in gate by transferring some of that gravity load over to the hinge side of the gate with a cross-brace. A compression cross-brace takes weight from the top bar and transfers it by pushing down against the bottom hinge.
The E-Z Brace was born out of a common need to fix sagging, dragging, sticking wood fence gates. We at E-Z Brace decided that constant call backs to re-adjust the customers fence gate was eating away at every bodies bottom line. Our ingenuity kicked in and we created what is the #1 gate brace on the market. We have designed our E-Z brace to come out of the box and onto the gate. Pre-assembled from the factory, our E-Z brace has two attached pieces of angle that swivel and allow you to mount either on the right-side or left-side, depending where your hinges are, and can be applied to virtually any wood fence gate application.
Our E-Z Brace is installed in just minutes. In the event if your gate sags a little due to the posts or hinge hardware adjusting, just remove the two self-tapping metal screws, adjust the gate up and reinstall the screws.
Its that simple!
E-Z Brace installs easily to fit on almost all wood fence gates.
Adjustable to fit a variety of gates, up to 3 - 6 feet (wide) & 6 - 8 feet (height)
You can remove sag in gate by transferring some of that gravity load over to the hinge side of the gate with a cross-brace. A compression cross-brace takes weight from the top bar and transfers it by pushing down against the bottom hinge.
The E-Z Brace was born out of a common need to fix sagging, dragging, sticking wood fence gates. We at E-Z Brace decided that constant call backs to re-adjust the customers fence gate was eating away at every bodies bottom line. Our ingenuity kicked in and we created what is the #1 gate brace on the market. We have designed our E-Z brace to come out of the box and onto the gate. Pre-assembled from the factory, our E-Z brace has two attached pieces of angle that swivel and allow you to mount either on the right-side or left-side, depending where your hinges are, and can be applied to virtually any wood fence gate application.
Our E-Z Brace is installed in just minutes. In the event if your gate sags a little due to the posts or hinge hardware adjusting, just remove the two self-tapping metal screws, adjust the gate up and reinstall the screws.
Its that simple!
E-Z Brace installs easily to fit on almost all wood fence gates.
Adjustable to fit a variety of gates, up to 3 - 6 feet (wide) & 6 - 8 feet (height)
14 سال پیش
در تاریخ 1388/12/21 منتشر شده
است.
141,833
بـار بازدید شده