Building a Stevens Single Shot Rifle, Part Two - The Block, Hammer, Lever and Trigger
127.8 هزار بار بازدید -
11 سال پیش
-
When I'm not making instructional
When I'm not making instructional machining videos, I actually build stuff. Here's a video montage on an ambitious project I started last year, the building of a Stevens Favorite .22 caliber rifle. Every part is, or will be hand made by me down to the last screw, even the rifled barrel. The original rifle belongs to my uncle and he asked me to get it working again. I ended up making a new firing pin for it and fitting a new extractor. I liked the rifle so much that I disassembled it, measured and sketched up every part, then made a CAD model and detailed drawings. This second part is on the machining of the block, hammer, lever and trigger, with much more to come. The entire build thread for the rifle can be found in the Gunsmithing section of metalworkingfun.com
11 سال پیش
در تاریخ 1392/06/08 منتشر شده
است.
127,890
بـار بازدید شده