Installing Procal 3 on 2018 Focus ST

Ford Performance has finally released the Procal3 software and "tune" for the 2018 Focus ST. Follow along as I provide information on how to install.

PDF instructions are here... https://performanceparts.ford.com/dow...

Procal3 for 2013-2018 Focus ST here... https://performanceparts.ford.com/par...

Procal3 Registration Page... https://performanceparts.ford.com/reg...

This calibration is offered by Ford Performance, and if installed by a Ford/Lincoln dealer does include a 3 year 36,000 mile warranty.  It does require 91 or higher octane fuel (93 preferred), provides an increase in torque of up to 90ft lbs over the stock 270 pound feet. Changes the shift light behavior, moves the maximum horsepower level lower in the RPM range but does not increase horsepower above the factory level.

Requires the following:
3/8" ratchet
8mm socket
short extension
long extension
5/8" spark plug socket
Spark Plug gapping tool
windows or mac laptop with internet access.

• #autos_vehicles
• #ford_focus_st
• #focus_st
• #ecoboost
• #procal3
• #procal_3
• #frpp
• #ford_performance