DIY | Casting Vacuum Chamber

Thank you for Watching and Supporting my New Channel!
*********************************************************
I am building by myself my own Workshop at home for Casting, Machining, and Pottery.
*********************************************************
Products Used in the Video:
1. Crystal Clear Epoxy Resin:
    https://amzn.to/3cr6HGP
2. White Foam Board/Sheet:  
    https://amzn.to/3sYdxdb (3/16" or ~ 5mm)
    https://amzn.to/3qw09eF  (1/8" or ~ 3mm)
3. Single-Stage 12CFM 1HP Vacuum Pump (Reasonable Price)
    https://amzn.to/3ejaBUH
4. 5 CFM Dual Stage  Air Vacuum Pump (Great Choice)
   https://amzn.to/2OyuHPX
5. Oil Filled Vacuum Pressure Gauge:
   https://amzn.to/3quAW4m
6. 1/4" Ball Valve:
   https://amzn.to/3bqCJmG
7. Brass Ball Check Valve, 1/4" (optional)
  https://amzn.to/3bt5iQJ
8. Male or Female Hex Nipple:
   https://amzn.to/3qmTeER
9. 1/4" ( Male End Air Hose Pipe Fitting
   https://amzn.to/3ce61US
10: High-Temperature Silicone Vacuum Tubing Hose ID 1/4":
    https://amzn.to/3rwZwD6
11: Dust Collection Hose 1 3/16 OD
    https://amzn.to/3qw0M81
12. 1.5 inch (39mm) Waterproof Heat Shrink Tubing/Sleeve:
   https://amzn.to/2Odxy0D
13. Refractory Mortar:
    https://amzn.to/2MVkY5C
********************************************************
Camera and Lens I used:
1. Sony Alpha a6000 Mirrorless Digital Camera 24.3MP:
  https://amzn.to/38lleCy
2. Meike 35mm F1.4 - Sony E Mount:
  https://amzn.to/3kVXARZ

********************************************************
They are Amazon Affiliate links with my Store ID: tncreation09-20 – It means if you purchase a product by click through one of those links, I will receive a small commission (at no additional cost to you). Therefore, please consider clicking through those links, this is a great way to support my work and my Channel.

Thank you very much & Warmest regards,
TN Creation.

• #howto_style
• #diy
• #tncreation
• #tn_creation
• #casting
• #vacuum_chamber
• #lost_wax_casting