Measuring Inside Diameter With Various Tools - Calipers to Inside Mic
13.5 هزار بار بازدید -
3 سال پیش
-
Having trouble getting the same
Having trouble getting the same accuracy measuring Inside Diameter (ID) as you are measuring Outside Diameter (OD), then this video is for you. I can't pass "feel" through the video but these techniques should help you develop your own feel for measuring.
Accurate measurement is the key to most machining tasks whether boring on a metal lathe or on your milling machine or just measuring parts for fit. You want to make sure your measurements are accurate.
The video has the following sections for the different tools - Where listed multiple times, they are measuring a different size bore:
Overview of all the tools - 1:35
Mitutoyo Digital Vernier Calipers - 3:45
Inside Spring Calipers - 6:15, 11:45, and 17:30
Telescopic Gauge - 9:05, 13:05 and 20:40
Mitutoyo 1-12" Inside Micrometer - 9:50, 13:45, and 22:00
I hope this helps you master your "feel" in accurate measurement.
Thanks for watching!
Accurate measurement is the key to most machining tasks whether boring on a metal lathe or on your milling machine or just measuring parts for fit. You want to make sure your measurements are accurate.
The video has the following sections for the different tools - Where listed multiple times, they are measuring a different size bore:
Overview of all the tools - 1:35
Mitutoyo Digital Vernier Calipers - 3:45
Inside Spring Calipers - 6:15, 11:45, and 17:30
Telescopic Gauge - 9:05, 13:05 and 20:40
Mitutoyo 1-12" Inside Micrometer - 9:50, 13:45, and 22:00
I hope this helps you master your "feel" in accurate measurement.
Thanks for watching!
3 سال پیش
در تاریخ 1400/01/04 منتشر شده
است.
13,577
بـار بازدید شده