Autel IM608 J2534 | Write a VIN on a USED Ford PCM Module | Case Study 2020

Hey guys this is Curtis, your Autel Diagnostic Consultant. Today I would like to share with you a case study on how I helped a client program a Vin number to a used Ford PCM module. The client is a mobile technician and he was stranded with no resolutions as the IM608 could not do the Vin Programmable Module Installation procedure.

Normally to do this procedure all you need to do is click programming and look for a programmable module installation (PMI) which is a sequence in that the software will save all the original PCM's information in our tool, then prompt you when to put the replacement module on it. Next, it will then transfer all the information to the replace module

With this specific vehicle which is a 2001 Ford F-250 it does not have this functionality on the IM608 so to do this procedure will be using J2534 with the OEM subscription in a Windows 10 laptop thanks so much and I hope you enjoy the video.

Go to www.Auteltech.co.za to book a consult and place your order.

Thanks!

#BestDiagnosticToolforCars
#AutoDiagnosticTool
#BestOBDTool
#AutelIM608 #AutelJ2534
#AutelConsultancy

• #education
• #autel_maxisys_elite
• #key_programming
• #maxisys_elite_training
• #maxisys_elite_price
• #ms906bt
• #im608_key_coding
• #ford_j2534_programming_how_to_use_the_im608
• #ford_pcm_replacement
• #how_to_write_a_vin_number
• #autel_j2534
• #autel_training
• #ford_pcm_reflash
• #bad_pcm_symptoms_for
• #ford_pcm_not_working
• #how_to_program_a_ford_pcm_with_the_autel_j2534
• #snap_on
• #diagnostic_trouble_shooting
• #j2534_training
• #autel