NanoPi R6S Bootup - Firmware Update (eMMC) - PPPoE Speedtest

The network ports of the NanoPi R6S are not working when testing with the pre-installed FriendlyWrt firmware, that is why I have to to update the firmware to the latest release.
In this video, I will show you how to install/update the FriendlyWrt into the eMMC storage with a microSD. After that, we are going to bootup the NanoPi R6S, have a tour at LuCI Web UI and check out the PPPoE throughput with Software Offloading enabled and disabled.

NanoPi R6S Wiki - https://wiki.friendlyelec.com/wiki/in...

Video timeframe:
00:00 - Bootup NanoPi R6S with FriendlyWrt
00:39 - The network ports / interfaces are not working
01:49 - Install new FriendlyWrt Firmware to eMMC with microSD
04:49 - The eFlasher UI (that install OS from microSD to eMMC)
05:59 - NanoPi R6S LuCI Web-UI Overview
06:52 - The Network Interfaces (My network setup)
07:17 - PPPoE Speedtest with Software Offloading Enabled
08:01 - PPPoE Speedtest with Software Offloading Disabled
08:40 - Next video Preview

- The NanoPi R6S Official Store - https://www.friendlyelec.com/index.ph...
- If you are in the US, you can get it for $169.99 - https://amzn.to/3GWkjue (Affiliate)

Stay tuned for the next video where we will have the WAN to LAN throughput test with power consumption overview!

Thank you and see ya!

• #science_technology
• #nanopi_r6s
• #nanopi_r6s_friendlywrt
• #nanopi_r6s_emmc_update
• #nanopi_r6s_emmc_install
• #nanopi_r6s_firmware_update
• #nanopi_r6s_pppoe_speedtest
• #nanopi_r6s_cpu_usage
• #nanopi_r6s_software_offloading
• #nanopi_r6s_fullcone_nat
• #nanopi_r6s_initial_configuration
• #nanopi_r6s_luci_web_ui
• #nanopi_r6s_initial_setup
• #nanopi_r6s_boot_up
• #nanopi_r6s_openwrt
• #nanopi_r6s_emmc_firmware_update
• #nanopi_r6s_emmc_firmware_install