Damascus integral handle knife from bearing balls
375 هزار بار بازدید -
2 سال پیش
-
I made what I call
I made what I call a python pattern Damascus knife using about 800 high-carbon steel balls.
Regarding the container, I chose not to remove it to get a better structure, and after finishing the first forge, I used a milling machine to remove the mild steel can.
About pattern inspiration. I have seen many steel ball forging videos, but the pattern is not what I want, I want to get something like an irregular circle, not an elongated ellipse, so I cut the billet into small pieces at 30°, and arrange them evenly to make A pattern of cross sections is obtained.
For the final forge weld, I used 1mm thick mild steel that was completely sealed by welding. It will be safer to do so. Here's what I learned from watching other YouTubers make explosion mosaics. Thanks for watching
-----------------------------------------------------------------------------
NOBLIE - custom knife store:https://noblie.eu/
-----------------------------------------------------------------------------
High frequency induction heater https://gdtaiguan.en.alibaba.com/zh_C...
knife sharpenerUS http://tsprof.us/?ref=3ctaf35mjm&utm_...
EU http://shop.tsprof.com/?ref=10450&utm...
Tungsten Carbide Burr Kit https://amazon.com/dp/B097BRDSZT
I get a small commission if you buy something through the above link.
---------------------------------------------------------------------------
#Damascus
#knifemaking
#TheFantasyChallenge
Regarding the container, I chose not to remove it to get a better structure, and after finishing the first forge, I used a milling machine to remove the mild steel can.
About pattern inspiration. I have seen many steel ball forging videos, but the pattern is not what I want, I want to get something like an irregular circle, not an elongated ellipse, so I cut the billet into small pieces at 30°, and arrange them evenly to make A pattern of cross sections is obtained.
For the final forge weld, I used 1mm thick mild steel that was completely sealed by welding. It will be safer to do so. Here's what I learned from watching other YouTubers make explosion mosaics. Thanks for watching
-----------------------------------------------------------------------------
NOBLIE - custom knife store:https://noblie.eu/
-----------------------------------------------------------------------------
High frequency induction heater https://gdtaiguan.en.alibaba.com/zh_C...
knife sharpenerUS http://tsprof.us/?ref=3ctaf35mjm&utm_...
EU http://shop.tsprof.com/?ref=10450&utm...
Tungsten Carbide Burr Kit https://amazon.com/dp/B097BRDSZT
I get a small commission if you buy something through the above link.
---------------------------------------------------------------------------
#Damascus
#knifemaking
#TheFantasyChallenge
2 سال پیش
در تاریخ 1401/07/22 منتشر شده
است.
375,007
بـار بازدید شده