How to calibrate Anritsu Site Master

Before making a measurement VSWR. calibrate an Anritsu Sitemaster.
Calibration method
1) Press the start Cal Button and connect Open to the RF out Port then press Enter button.
2)Remove the Open connection and connect Short then press Enter.
3)Remove th Short plug and connect load termination and press the enter button.

5)check at the left Conner posts Cal On

How to use site Master to measure VSWR.
How to use site Master to measure VSWR

Become a Patron
Patreon: LayaBro

Blog
http://layabro.blogspot.com/

Follow Me
Facebook: youtubelayabro
Twitter: LayaBrolaya

• #science_technology
• #site_master_antenna_and_cable_analyzer
• #instacal_calibration_module
• #oe_calibration_module
• #calibration_module
• #mn4765b
• #vswr_calibration
• #anritsu_calibration_module
• #anritsu_site_master_training
• #s331l
• #s332d
• #antenna_analyzer
• #base_station
• #site_master
• #anritsu_site_master
• #s331l_manual
• #c1998_module_calibration
• #ham_radio_friedrichshafen
• #antenna_analyzer_review
• #s332d_anritsu
• #s331l_anritsu
• #antenna_analyzer_vs_swr_meter
• #antenna_analyzers_comparison
• #lte
• #4g
• #3g
• #2g
• #bts
• #noteb