Laser etching a brass wax seal stamp on a 30W fiber laser
9.9 هزار بار بازدید -
4 سال پیش
-
So this video is sped
So this video is sped up in parts, or it'd be 20 minutes long! It takes a bit of time to get an etch deep enough into brass for a good relief to show up in the stamping wax. After each part of the depth etch, I do some cleaning passes to make the surface smoother.
4 سال پیش
در تاریخ 1399/01/06 منتشر شده
است.
9,903
بـار بازدید شده