Programming STM32 MCUs using STM32CubeProgrammer: Part 1
25.8 هزار بار بازدید -
2 سال پیش
-
Find out more information:
Find out more information: https://bit.ly/STM32CubeProg
Development board used: https://bit.ly/STM32H747I-DISCO
STM32CubeProgrammer User Manual: https://bit.ly/UM-2237
Learn how to program, read, and configure your STM32 microcontroller using the STM32CubeProgrammer software tool and use all its features during development and automate repetitive programming tasks.
The STM32CubeProgrammer is a multi-OS software tool that can be used to program the on-chip and off-chip memories associated with your STM32 microcontroller through various interfaces such as SWD, JTAG, USB, SPI, and more.
Things you will learn in this series:
• Understand the different interfaces of the ST-Link that can be used
• Understand how to connect to your STM32 microcontroller with different configurations
• Understand how to read the microcontroller memory
• Understand how to program the entire microcontroller flash memory
• Understand how to erase the entire microcontroller flash memory
• Understand how to program the microcontroller option-byte configuration
In this video: we’ll start with an overview of what to expect for the entire series, as well as a deeper understanding of what the STM32CubeProgrammer is and how it connects to the STM32 microcontroller to read/program its memory. We will see how to update the firmware of the ST-Link, establish a connection to the target MCU, and perform some memory operations (read, program, verify).
Development board used: https://bit.ly/STM32H747I-DISCO
STM32CubeProgrammer User Manual: https://bit.ly/UM-2237
Learn how to program, read, and configure your STM32 microcontroller using the STM32CubeProgrammer software tool and use all its features during development and automate repetitive programming tasks.
The STM32CubeProgrammer is a multi-OS software tool that can be used to program the on-chip and off-chip memories associated with your STM32 microcontroller through various interfaces such as SWD, JTAG, USB, SPI, and more.
Things you will learn in this series:
• Understand the different interfaces of the ST-Link that can be used
• Understand how to connect to your STM32 microcontroller with different configurations
• Understand how to read the microcontroller memory
• Understand how to program the entire microcontroller flash memory
• Understand how to erase the entire microcontroller flash memory
• Understand how to program the microcontroller option-byte configuration
In this video: we’ll start with an overview of what to expect for the entire series, as well as a deeper understanding of what the STM32CubeProgrammer is and how it connects to the STM32 microcontroller to read/program its memory. We will see how to update the firmware of the ST-Link, establish a connection to the target MCU, and perform some memory operations (read, program, verify).
2 سال پیش
در تاریخ 1401/02/12 منتشر شده
است.
25,809
بـار بازدید شده