Audi A4 B6 | Mini H1 HID Bi-xenon Projector Retrofit kit Installation instructions headlight upgrade
464.1 هزار بار بازدید -
12 سال پیش
-
With this retroquick kit you
With this retroquick kit you transform your headlights to full Bi-xenon headlight, with xenon low beam and quad high beam (xenon + halogen). You will have more light in front of your A4, and next to that your Audi will look better with the luxurious look of xenon with the beautiful bright white light.
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
https://retrofitlab.com/products/audi...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:08 Remove the H7 bulb
0:18 Remove the headlight frame clip. First remove the side closest to the engine, this is the shortest hook and is easier to remove.
0:25 Remove the 3 nuts (5,5mm) which hold the projector.
0:30 Take the Valeo H7 halogen projector out of the housing.
0:40 mount the retroquick braket to the projector.
1:15 Place the projector.
1:23 Guid the high beam solenoid wire to the high beam section.
1:35 Mount the projector using the nuts. Note: since the thread is thin, don't tighten them too much, you can break the thread!
1:47 Connect the high beam splitter to the connector, bulb and solenoid wires
2:06 Put the headlight frame clip back in to place.
2:13 Mount the bulb in the Mini H1 projector with the clip. Connect the ballast power cables to the H7 connector. To guide the wires through the cap, drill a hole of 22mm in the cap.
2:30 Here you can perfectly mount the ballast using double sided tape
2:43 The Valeo H7 halogen compared to the Mini H1 Bi-xenon
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
Facebook: EuropeanHeadlightCommunity
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: Facebook: Retrofitlab
Messenger: https://www.m.me/Retrofitlab/
Instagram: Instagram: retrofitlab.com_official
Our website: https://www.retrofitlab.com/
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Audi #A4B6 #AudiA4B6 #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement
𝗬𝗼𝘂 𝗰𝗮𝗻 𝗯𝘂𝘆 𝘁𝗵𝗶𝘀 𝗴𝗿𝗲𝗮𝘁 𝘂𝗽𝗴𝗿𝗮𝗱𝗲 𝗸𝗶𝘁 𝗵𝗲𝗿𝗲:
https://retrofitlab.com/products/audi...
𝗜𝗻𝘀𝘁𝗿𝘂𝗰𝘁𝗶𝗼𝗻𝘀:
0:08 Remove the H7 bulb
0:18 Remove the headlight frame clip. First remove the side closest to the engine, this is the shortest hook and is easier to remove.
0:25 Remove the 3 nuts (5,5mm) which hold the projector.
0:30 Take the Valeo H7 halogen projector out of the housing.
0:40 mount the retroquick braket to the projector.
1:15 Place the projector.
1:23 Guid the high beam solenoid wire to the high beam section.
1:35 Mount the projector using the nuts. Note: since the thread is thin, don't tighten them too much, you can break the thread!
1:47 Connect the high beam splitter to the connector, bulb and solenoid wires
2:06 Put the headlight frame clip back in to place.
2:13 Mount the bulb in the Mini H1 projector with the clip. Connect the ballast power cables to the H7 connector. To guide the wires through the cap, drill a hole of 22mm in the cap.
2:30 Here you can perfectly mount the ballast using double sided tape
2:43 The Valeo H7 halogen compared to the Mini H1 Bi-xenon
𝗔𝗱𝘃𝗮𝗻𝘁𝗮𝗴𝗲𝘀 𝗼𝗳 𝗮 𝗕𝗶-𝘅𝗲𝗻𝗼𝗻 𝗽𝗿𝗼𝗷𝗲𝗰𝘁𝗼𝗿 𝗿𝗲𝘁𝗿𝗼𝗳𝗶𝘁 𝗸𝗶𝘁:
• Much better light output
• Double high beam (xenon + halogen)
• No glare
• Lower energy consumption (35 watt instead of 55 watt)
• Luxury OEM look
𝗖𝗵𝗲𝗰𝗸 𝗼𝘂𝘁 𝗼𝘂𝗿 𝗻𝗲𝘄 𝗙𝗮𝗰𝗲𝗯𝗼𝗼𝗸 𝗴𝗿𝗼𝘂𝗽:
Facebook: EuropeanHeadlightCommunity
𝗙𝗶𝗻𝗱 𝘂𝘀 𝗼𝗻:
Facebook: Facebook: Retrofitlab
Messenger: https://www.m.me/Retrofitlab/
Instagram: Instagram: retrofitlab.com_official
Our website: https://www.retrofitlab.com/
𝗢𝘂𝗿 𝗦𝘁𝗼𝗿𝘆:
Retrofitting refers to the addition of new technology or features to older systems. These days there are a lot of people who put a simple plug & play xenon kit in their halogen headlight housing in an attempt to improve night vision and looks of their vehicle. In fact they don’t realize that their headlight beams are often worse than before. Night vision achieves relatively little improvement on night vision because of a poor beam pattern, which increases the blinding of other road users. This is because their headlight housings are designed for halogen and not xenon.
A true Bi-Xenon projector update is now possible for your car. Such an upgrade will significantly improve your light output from 700-2100 lumens to 2800 and 3500 lumens, without blinding other traffic with glare from your headlight. Upgrade your headlight OEM style!
The latest high power Led bulbs will upgrade both the exterior and interior lighting system of your car. Led lighting is becoming more and more popular in the automotive market for obvious reasons. They have longer lifetime, use less energy and improve safety with their fast response time.
Do you have any questions? Do not hesitate to contact us, we are happy to help you out!
Good luck with your retrofit!
These products are not ECE-approved and must not be used on public roads in any exterior application. Use on public roads will invalidate both the operating license and insurance coverage.
#Audi #A4B6 #AudiA4B6 #Aharon #Retrofit #DIY #Upgrade #Headlight #lighting #HID
#Retrofit #LED #custom #improvement
12 سال پیش
در تاریخ 1391/10/19 منتشر شده
است.
464,137
بـار بازدید شده