John Park's Ninja Timer: Giant Display Build @adafruit @johnedgarpark #adafruit
66.4 هزار بار بازدید -
7 سال پیش
-
Build a huge timer for
Build a huge timer for an obstacle course event or race. It's a digital segment display made from RGB NeoPixels!
Laser-cut acrylic is layered to create large, sharp, segments that are backlit by NeoPixel strips, and controlled with an Arduino. Huge buttons for start and stop are wired in over CAT5 network cable.
Build your own with the tutorial here: https://learn.adafruit.com/ninja-time...
-----------------------------------------
Visit the Adafruit shop online - http://www.adafruit.com
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: SoundCloud: bartlebeats
-----------------------------------------
Laser-cut acrylic is layered to create large, sharp, segments that are backlit by NeoPixel strips, and controlled with an Arduino. Huge buttons for start and stop are wired in over CAT5 network cable.
Build your own with the tutorial here: https://learn.adafruit.com/ninja-time...
-----------------------------------------
Visit the Adafruit shop online - http://www.adafruit.com
Subscribe to Adafruit on YouTube: http://adafru.it/subscribe
Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell
Watch our latest project videos: http://adafru.it/latest
New tutorials on the Adafruit Learning System: http://learn.adafruit.com/
Music by bartlebeats: SoundCloud: bartlebeats
-----------------------------------------
7 سال پیش
در تاریخ 1395/12/27 منتشر شده
است.
66,405
بـار بازدید شده