Simple arduino based 4 floor elevator project
8.3 هزار بار بازدید -
10 سال پیش
-
An AWESOME NEWS TO MY
An AWESOME NEWS TO MY CURRENT CHANNEL SUBSCRIBERS:
I have generated 61 great educational course lessons devoted to programming Siemens S7-1200 and KTP400 HMI display devices made by Siemens for intermediate and beginners as well. Also, 32 lessons devoted to programming the Allen Bradley Series of PLCs mainly for RSLogix 5000 and 500 CONTROLLERS. Just recently, I started creating similar lessons for the Delta PLC
series. Please use the plcgoods
Link to subscribe to other plc-related channels and enjoy watching all those contents!
This is a simple educational 4-floor elevator but it has nearly all facilities that a real elevator does. I have used an Arduino development board which is installed in the bottom of a shell PCB which is holding the reset of the other components such as 2×16 character LCD, few pushbuttons, power source terminals, a potentiometer etc.
To watch a video of this project being controlled with a typical ATmega8 microprocessor or a PLC, in action respectively, click the following links:Microcontroller based (ATmega8) 4 Flo... or Programming a 4 level elevator with S... you can contact me through [email protected] thanks for watching my video.
I have generated 61 great educational course lessons devoted to programming Siemens S7-1200 and KTP400 HMI display devices made by Siemens for intermediate and beginners as well. Also, 32 lessons devoted to programming the Allen Bradley Series of PLCs mainly for RSLogix 5000 and 500 CONTROLLERS. Just recently, I started creating similar lessons for the Delta PLC
series. Please use the plcgoods
Link to subscribe to other plc-related channels and enjoy watching all those contents!
This is a simple educational 4-floor elevator but it has nearly all facilities that a real elevator does. I have used an Arduino development board which is installed in the bottom of a shell PCB which is holding the reset of the other components such as 2×16 character LCD, few pushbuttons, power source terminals, a potentiometer etc.
To watch a video of this project being controlled with a typical ATmega8 microprocessor or a PLC, in action respectively, click the following links:Microcontroller based (ATmega8) 4 Flo... or Programming a 4 level elevator with S... you can contact me through [email protected] thanks for watching my video.
10 سال پیش
در تاریخ 1393/04/01 منتشر شده
است.
8,301
بـار بازدید شده