Rotary Engraving With the xTool D1
41.2 هزار بار بازدید -
2 سال پیش
-
In this video we will
In this video we will take you through getting the xTool D1 Rotary up and running with LightBurn. We will go through the physical installation, configuring the Rotary within Lightburn, and running a test job.
xTool D1 Laser Engraver LightBurn Set Up & First Project:
https://www.seevid.ir/fa/w/QZwpb_BZPI0
Understanding The Different Start From Modes In LightBurn
https://www.seevid.ir/fa/w/aphiLTUWcjE
LightBurn Tutorial Playlist:
• LightBurn Tutorials
If you need help, please come to our support forum at http://forum.lightburnsoftware.com/ or email us at [email protected]
$50 Off XTool D1 Coupon Code: XT-Lightburn
Link: https://bit.ly/3MUe2j3
Time Stamps:
https://www.seevid.ir/fa/w/WQPOAvz5OuU - Overview
https://www.seevid.ir/fa/w/WQPOAvz5OuU - Physical setup of the rotary
https://www.seevid.ir/fa/w/WQPOAvz5OuU - Configuring the rotary with LightBurn
https://www.seevid.ir/fa/w/WQPOAvz5OuU - Creating a sample project
https://www.seevid.ir/fa/w/WQPOAvz5OuU - Positioning the laser
https://www.seevid.ir/fa/w/WQPOAvz5OuU - Running Job & next steps
2 سال پیش
در تاریخ 1401/01/27 منتشر شده
است.
41,268
بـار بازدید شده