LinuxCNC on Raspberry Pi

LinuxCNC on Raspberry Pi running on a Xenomai kernel. The step generator is offloaded to an external PIC32 uC using SPI as a the communication bus. The WEB-based GUI is ported from the miniemc2 (http://code.google.com/p/miniemc2) project.

Details about the board can be found here: http://code.google.com/p/picnc/
Forum topic here: http://www.raspberrypi.org/phpBB3/vie...

• #science_technology
• #rpi
• #raspberry_pi
• #raspberry
• #linuxcnc
• #xenomai
• #pic32
• #picnc