How to Tune Up a Jointer
7.1 هزار بار بازدید -
4 سال پیش
-
I love my jointer. It’s
I love my jointer. It’s one of my favorite tools in the shop. However, I noticed that my jointer was a bit out of whack. It was jointing boards into a very slight bow, which is no good for getting clean edge joints for glue-ups. Before I tackle some big projects that are coming up, I needed to get this thing tuned up. Today, I adjusted the infeed table to ensure that it’s in parallel to the outfeed table.
--⏱️Timestamps⏱️--
0:00 Tuning up my jointer
4:42 Mail call!
I’m confident that there are other ways to perform these tasks. This video is a glimpse into my shop and how I make things. If you want to follow along on my woodworking journey, make sure you subscribe and hit the notification bell so you are alerted to my daily videos.
Here’s a list of tools and materials that I used to make this project. As an Amazon Associate I earn from qualifying purchases.
•• Tools & Materials ••
Jet 8” Jointer: amzn.to/310uabK
Straight edge: amzn.to/317THzQ
Feeler gauges: amzn.to/3jZFWMw
Starbond black CA glue: amzn.to/33jjckN
Starbond CA glue: amzn.to/2XcgrO0
Starbond medium brown CA glue: amzn.to/2Pd8jsg
Starbond accelerator: amzn.to/33bZ3Np
•• My Links ••
My Amazon Store: www.amazon.com/shop/newtonmakes
Website: newtonmakes.com/
Instagram: www.instagram.com/newtonmakes/
Facebook: www.facebook.com/newtonmakes/
Esty: www.etsy.com/shop/GenWoodworker
4 سال پیش
در تاریخ 1399/05/13 منتشر شده
است.
7,120
بـار بازدید شده