Metal Etching DIY - Etching Hammer
6 هزار بار بازدید -
2 سال پیش
-
Click here for the detailed
Click here for the detailed video:
Hammer Restoration [Very Rusty Restor...
This restoration is not a normal one, because I am restoring a very rusty hammer, just like "Awesome Restorations" did. But I do not do this with laser, hardening furnace or other high-tech, but with very simple methods that almost every hobbyist has at home. For example, I etching metal, but as mentioned with very simple means.
I had a lot of fun filming this restoration video, because I learned and applied new techniques, and in video editing I tried new things to get very close to the video of Awesome Restorations. By the way, I am a very big fan of Martin's videos, so I send him my best regards!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
This hammer is really rusty! Therefore, in the first step I blast this with slag. Then I grind the hammer faces and the sides with different types of sandpaper. With a propane burner I heat the old rusty hammer to about 800°C (Tip: Since salt melts at 800°C, just sprinkle it on top) and the oil to about 80°C. After hardening, including burnishing, I prepare the large surfaces on the sides. From adhesive foil I cut my desired pattern and now etch the surface of the old hammer, the result is amazing - and that with household products. Installing the handle is just a piece of cake. But take a look for yourself! The result is "Awesome"!
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: blasting cabin, blasting medium: slag, hammer, center punch, drill, cordless screwdriver, tap, drilling oil, eyebolts, threaded rods, pin punch, soft-face hammer, sandpaper, angle grinder, sandpaper grinding wheel, Bunsen burner, propane gas, wire, adhesive foil, scalpel, paper tape, salt, water, cotton swabs, crocodile clips, 9V battery, saws
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
@forgottenshinerestoration
You like what you see and you want to help the channel to develop continuously?
If you want to support me you can donate via Paypal:
https://www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work
Rust Remover – Rostio: https://amzn.to/33rKF2q
Blasting cabinet: https://amzn.to/33rgJDB
Sandpaper - different grit: https://amzn.to/3haK5hs
Equipment:
„Camera“: https://amzn.to/3h8qSND
Ring lamp: https://amzn.to/3nWjh68
Microphone Rode: https://amzn.to/3nYYVck
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!
Hammer Restoration [Very Rusty Restor...
This restoration is not a normal one, because I am restoring a very rusty hammer, just like "Awesome Restorations" did. But I do not do this with laser, hardening furnace or other high-tech, but with very simple methods that almost every hobbyist has at home. For example, I etching metal, but as mentioned with very simple means.
I had a lot of fun filming this restoration video, because I learned and applied new techniques, and in video editing I tried new things to get very close to the video of Awesome Restorations. By the way, I am a very big fan of Martin's videos, so I send him my best regards!
▬ What did I do ?! ▬▬▬▬▬▬▬▬
This hammer is really rusty! Therefore, in the first step I blast this with slag. Then I grind the hammer faces and the sides with different types of sandpaper. With a propane burner I heat the old rusty hammer to about 800°C (Tip: Since salt melts at 800°C, just sprinkle it on top) and the oil to about 80°C. After hardening, including burnishing, I prepare the large surfaces on the sides. From adhesive foil I cut my desired pattern and now etch the surface of the old hammer, the result is amazing - and that with household products. Installing the handle is just a piece of cake. But take a look for yourself! The result is "Awesome"!
▬ Good to know ▬▬▬▬▬▬▬▬
I used the following tools: blasting cabin, blasting medium: slag, hammer, center punch, drill, cordless screwdriver, tap, drilling oil, eyebolts, threaded rods, pin punch, soft-face hammer, sandpaper, angle grinder, sandpaper grinding wheel, Bunsen burner, propane gas, wire, adhesive foil, scalpel, paper tape, salt, water, cotton swabs, crocodile clips, 9V battery, saws
▬ Do you want to support me? ▬▬▬▬▬▬▬▬
Would you like to become a channel member? Then you can do it here:
@forgottenshinerestoration
You like what you see and you want to help the channel to develop continuously?
If you want to support me you can donate via Paypal:
https://www.paypal.com/donate?hosted_...
or use the following affiliate links:
Material for work
Rust Remover – Rostio: https://amzn.to/33rKF2q
Blasting cabinet: https://amzn.to/33rgJDB
Sandpaper - different grit: https://amzn.to/3haK5hs
Equipment:
„Camera“: https://amzn.to/3h8qSND
Ring lamp: https://amzn.to/3nWjh68
Microphone Rode: https://amzn.to/3nYYVck
Affiliate links don't cost you anything, I just get a small share from the seller, you have no disadvantage from it.
▬ Did you like it? ▬▬▬▬▬▬▬▬
Did you like the video? Then like, subscribe and please share it!
Many Thanks!
2 سال پیش
در تاریخ 1401/09/19 منتشر شده
است.
6,037
بـار بازدید شده