Mounting a Honda K24 in a Ferrari 308 GTBi - Where Do We Begin? - Ep. 7

StanceWorks
StanceWorks
56.6 هزار بار بازدید - 4 سال پیش - Today, we're taking an overall
Today, we're taking an overall look at where to begin with the engine mounting process. There's a lot to consider: how does the chassis need to be modified, where does the engine need to be, and is there room for axles?

The Honda K24, being a front-wheel-drive platform, has lots of similarities with the Ferrari 308 GTBi's F106 engine with respect to layout: both are transverse engines with similar transmission styles. We'll need to make sure we have room to attach the Honda axles to the Ferrari wheel hubs.

StanceWorks OG Oxer from Australia also joins in, providing a full 3D scan of the engine for future use.

There's a lot to digest... but a good plan is the best way to start any major project.

Be sure to follow StanceWorks on Instagram: @StanceWorks

Follow Mike and his progress in Instagram at @mike_stanceworks

Be sure to support our friends at H&R Springs for helping bring this project to life:
www.hrsprings.com

Last but not least, check out the rest of the gang that helps to make this project happen:
www.rsfuture.com
@rsfuture
4 سال پیش در تاریخ 1399/10/30 منتشر شده است.
56,674 بـار بازدید شده
... بیشتر