How To Program A Universal Garage Door Opener Keypad
239.6 هزار بار بازدید -
6 سال پیش
-
Very quick video on how
Very quick video on how to program a universal garage door opener keypad. This is the Chamberlain KLIK2-U keypad. We programmed this to a purple button Liftmaster screw drive.
** For Genie openers you may need to hit the “0” key twice for it to sync **
Check out the chart in the video to see which ID / code (this is so your keypad is running the correct frequency) your opener is and just use that instead of the number I used. Otherwise it isn't too difficult to do as you saw. (:
If you need one of these keypads you can get one buy clicking this Amazon link: https://amzn.to/2RaEWKD
Thanks for watching and don't forget to hit that like/subscribe button!
This channel contains affiliate links to products. We may receive a commission for purchases made through these links (at no additional cost to you of course). Thank you for supporting us this way (:
Feel like supporting us with a tip? Venmo link below (:
https://account.venmo.com/u/garagedoo...
** For Genie openers you may need to hit the “0” key twice for it to sync **
Check out the chart in the video to see which ID / code (this is so your keypad is running the correct frequency) your opener is and just use that instead of the number I used. Otherwise it isn't too difficult to do as you saw. (:
If you need one of these keypads you can get one buy clicking this Amazon link: https://amzn.to/2RaEWKD
Thanks for watching and don't forget to hit that like/subscribe button!
This channel contains affiliate links to products. We may receive a commission for purchases made through these links (at no additional cost to you of course). Thank you for supporting us this way (:
Feel like supporting us with a tip? Venmo link below (:
https://account.venmo.com/u/garagedoo...
6 سال پیش
در تاریخ 1397/10/15 منتشر شده
است.
239,656
بـار بازدید شده