Dell U2723QE Daisy Chaining Guide
49.9 هزار بار بازدید -
پارسال
-
Jay goes through the 5
Jay goes through the 5 step process to set-up daisy chaining 2x UltraSharp U2723QE Monitors.
Steps:
Step 1: Pick Master & Slave Monitor
Step 2: Set them up with both connected to your device using USBC/HDMI/DP - Go into settings and go to display, turn on multi monitor sync.
Step 3: Connect DisplayPort cable from Master using the DP Port with 90w into Slave DP 90W Port.
Step 4: Connect USB-C from Master Port to USBC port left of DP
Step 5: Check resolutions
Dell Monitors that allow Daisy Chaining:
- U2723QE
- U3223QE
Steps:
Step 1: Pick Master & Slave Monitor
Step 2: Set them up with both connected to your device using USBC/HDMI/DP - Go into settings and go to display, turn on multi monitor sync.
Step 3: Connect DisplayPort cable from Master using the DP Port with 90w into Slave DP 90W Port.
Step 4: Connect USB-C from Master Port to USBC port left of DP
Step 5: Check resolutions
Dell Monitors that allow Daisy Chaining:
- U2723QE
- U3223QE
پارسال
در تاریخ 1402/04/02 منتشر شده
است.
49,925
بـار بازدید شده