How To Part-Off A Long Piece Of Large Diameter Bar On A Small Lathe
34.5 هزار بار بازدید -
4 سال پیش
-
See this simple safe method
See this simple safe method of parting-off a long piece of large diameter bar on the Myford ML7 or any other small lathe. This is the only method where you can use a part-off tool a long distance from the jaw face. I have used the part-off set upside down, but you can also use this method with a tool set up the normal way.
4 سال پیش
در تاریخ 1399/02/24 منتشر شده
است.
34,543
بـار بازدید شده