Turning, Facing & Threading on the Tormach CNC Lathe! Widget28
112.6 هزار بار بازدید -
9 سال پیش
-
I am blown away by
I am blown away by the capabilities and ease-of-use with the new Tormach CNC lathe. Absolutely amazed. I had a customer job come in for a bushing with two different thread pitches and a few different OD's. I thought I'd make them on the manual machine but keep one as an example to 'aspire to' when I finally learned enough to make a part like this on the Tormach CNC lathe. On 4140 too!
Well, I had a few hours on Sunday and was BLOWN away at how easy this part was to make. Bottom line: I never made them on the manual machine but rather spent a few minutes (!) and had them programmed and turned on the Tormach CNC lathe! It is incredible how easy the conversational programming is to use!
I'm going to LOVE this machine!
Tormach is hosting an open house at their Wisconsin HQ on Saturday May 2nd - click for details and to RSVP: http://bit.ly/1wdNH0X
If you enjoy this NYC CNC video please hit the like button and share with a friend, it really goes a long way!
Recent Videos:
DIY Arduino CNC machine with GRBL: DIY Cheap Arduino CNC Machine - Machi...
Subscribe For More - http://www.youtube.com/subscription_c...
Follow on Twitter - Twitter: nyccnc
Facebook - Facebook: nyccnc
Instagram Instagram: saundersmachineworks
Music copyrighted by John Saunders 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH
Well, I had a few hours on Sunday and was BLOWN away at how easy this part was to make. Bottom line: I never made them on the manual machine but rather spent a few minutes (!) and had them programmed and turned on the Tormach CNC lathe! It is incredible how easy the conversational programming is to use!
I'm going to LOVE this machine!
Tormach is hosting an open house at their Wisconsin HQ on Saturday May 2nd - click for details and to RSVP: http://bit.ly/1wdNH0X
If you enjoy this NYC CNC video please hit the like button and share with a friend, it really goes a long way!
Recent Videos:
DIY Arduino CNC machine with GRBL: DIY Cheap Arduino CNC Machine - Machi...
Subscribe For More - http://www.youtube.com/subscription_c...
Follow on Twitter - Twitter: nyccnc
Facebook - Facebook: nyccnc
Instagram Instagram: saundersmachineworks
Music copyrighted by John Saunders 5 Reasons to Use a Fixture Plate on Your CNC Machine: https://bit.ly/3sNA4uH
9 سال پیش
در تاریخ 1393/11/28 منتشر شده
است.
112,666
بـار بازدید شده