Abaqus - Contact modeling tutorial
38.5 هزار بار بازدید -
9 سال پیش
-
DPS Digital Product Simulation
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
Jerome DAZIANO
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Shell meshes and partitions are realized in the Mesh Module
4. A distributing coupling (~RBE3) is defined in the Interaction Module
5. Contact Pairs are defined in the Interaction Module
6. Different steps are created in the Step Module to apply contact
7. The preprocessing is achived in the Load Module
8. The simulation results are analysed in Abaqus/Viewer
Abaqus Abaqus/CAE
Jerome DAZIANO
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Shell meshes and partitions are realized in the Mesh Module
4. A distributing coupling (~RBE3) is defined in the Interaction Module
5. Contact Pairs are defined in the Interaction Module
6. Different steps are created in the Step Module to apply contact
7. The preprocessing is achived in the Load Module
8. The simulation results are analysed in Abaqus/Viewer
9 سال پیش
در تاریخ 1394/07/09 منتشر شده
است.
38,566
بـار بازدید شده