Norden Mfg 2019 Hay Accumulator System
139.8 هزار بار بازدید -
6 سال پیش
-
The Norden Hay Accumulator system
The Norden Hay Accumulator system uses gravity and a simple mechanical system to efficiently arrange small square bales into a group.
Unlike other bale accumulators, it uses no hydraulics, electronics, or chains. Using excess energy from the baler plunger, the bales are pushed up and out the top of the chute. As the bales slide down the accumulator bed, the last bale in each row swings a gate to open the next row. The last bale in the group opens the back gate. As the accumulator unloads itself, springs and counterweights automatically return all of the gates back to their starting position, ready for the next bale.
8 models – 4 to 18 bale systems for all needs
Fully automated. No hydraulics or electronics
Gently carried bales stay clean & intact
High capacity to handle any baler output
Norden Tie-Grabber
7 Models 8 to 18 bales
Tied grabs make for safer and faster loading and stacking
Save time securing loads for transportation
Can be used with any brand of hay accumulator
Norden Grabber
8 Models 8 to 18 bales
Can be used with any brand of hay accumulator
Durable frame made from 3/16” tubing
Maintenance free design uses UHMW bushings that don’t require greasing
Easy to replace worn/damaged hooks
Norden Mfg was previously Kuhns Mfg but the company renamed itself in 2022 to reduce confusion with another farm equipment company.
www.nordenmfg.com
Phone: 877-296-5851
E-mail: [email protected]
Unlike other bale accumulators, it uses no hydraulics, electronics, or chains. Using excess energy from the baler plunger, the bales are pushed up and out the top of the chute. As the bales slide down the accumulator bed, the last bale in each row swings a gate to open the next row. The last bale in the group opens the back gate. As the accumulator unloads itself, springs and counterweights automatically return all of the gates back to their starting position, ready for the next bale.
8 models – 4 to 18 bale systems for all needs
Fully automated. No hydraulics or electronics
Gently carried bales stay clean & intact
High capacity to handle any baler output
Norden Tie-Grabber
7 Models 8 to 18 bales
Tied grabs make for safer and faster loading and stacking
Save time securing loads for transportation
Can be used with any brand of hay accumulator
Norden Grabber
8 Models 8 to 18 bales
Can be used with any brand of hay accumulator
Durable frame made from 3/16” tubing
Maintenance free design uses UHMW bushings that don’t require greasing
Easy to replace worn/damaged hooks
Norden Mfg was previously Kuhns Mfg but the company renamed itself in 2022 to reduce confusion with another farm equipment company.
www.nordenmfg.com
Phone: 877-296-5851
E-mail: [email protected]
6 سال پیش
در تاریخ 1397/10/10 منتشر شده
است.
139,853
بـار بازدید شده